Customer Kudos
"I have purchased many items from zZounds and have been extremely happy with my experiences over the years. I don’t shop anywhere else for music gear and never will."
Search Results
-
CBI QB-R Rubberized Quad Box
This CBI QB-R quad box is rubberized for shock protection and features four 20-amp outlets, and 25 feet of length with a 12/3 SJOOW lead male power end.
-
Hosa PWC-400 Power Cable (14 AWG, IEC C13 to NEMA 5-15P)
You can connect computer equipment or pro audio gear with a C14 inlet to your household electricity with this reliable power cable from Hosa.
-
Hosa PWX-400 NEMA 5-15R to NEMA 5-15P, 14 AWG AC Power Extension Cord
No matter how great your setup is, if it doesn't have power it won't work. No venue or studio should be without a selection of reliable extension cords.
-
CBI IEC Power and 1X XLR Audio Cable
Cut down on setup time: run your IEC power and XLR audio cables at the same time. Perfect for powered speakers, these cables bundle power and XLR together.
-
Hosa Power Cord, Neutrik powerCON to Hosa NEMA 5-15P
Need a Neutrik powerCON cord? Power up with this Hosa powerCON cable, with one locking powerCON connector and one NEMA 5-15P plug for plugging into the wall.
$72.95- No Credit Check4 x$18.24
-
Hosa PWC IEC C13 to NEMA 5-15P 18 AWG Power Cord
Need a replacement power cable for your amp, computer, or TV? This Hosa power cable will power a ton of consumer, A/V, and live sound gear!
-
Bose ToneMatch Audio Engine/Mixer Power Supply
Power your Bose T4S ToneMatch with this cable. It's a must if you're running your T4S as a standalone mixer/interface, or with any PA with no ToneMatch port.
$55.00- No Credit Check4 x$13.75
-
Hosa Power Extension Cord, IEC C14 to C13
Whether you're a DJ setting up a light show, or just need more length to connect your PC to your monitor, you'll need a good extension cord like this one.
-
CBI PC14 PowerCON Extension Cable
Extend the range of your passive speaker rig with this CBI PCI14 PowerCON extension cable. This cable adds 5 feet of 14-gauge wire to your setup.
-
Gator GTR-PWR-1 Wall-Wart Pedalboard Power Supply
Power a guitar pedal with this Gator power supply! This wall-wart style power supply provides 9V of power to work with most standard pedals.
-
CBI TRIPT12 12-AWG Triple Tap Power Extension Cord
Power your amp, your pedalboard and more! This stage-ready power cord gives you 3 outlets with plenty of room for wall-warts -- no need for a power strip.
-
Hosa PWD-401 Multi-Head Daisy Chain IEC Power Cable
Need a power outlet? This cable powers your gear while adding an extra outlet. Clean up the back of racks by daisy-chaining multiple PWD-401 cables together.
-
Hosa Grounded Power Y-Cable
Power two keyboards, an amp and pedalboard, or your computer and monitor. The 14-inch Hosa Grounded Power Y-cable saves space anywhere you need two outlets.
-
ADJ ECCOM IEC AC Extension Cable
Don't get stuck with an power cable that isn't long enough. Add this C13 to C14 extension cable anywhere your gear's IEC power cable is a few feet short.
-
D'Addario PW-IECPB-10 Power Cable Plus
Connect this D'Addario Power Cable Plus to your amp and use its accessory outlet to plug your pedalboard, or any other device, into the same wall outlet!
-
Hosa Dual IEC Power Cable
When a power strip is overkill, this dual power cable is perfect for running power to two pieces of gear in your studio rack or portable recording rig.
-
D'Addario PW-IECB-10 IEC to NEMA Plug Power Cable
Don't settle for any power cable -- this D'Addario cable uses 100% more copper than standard 18 gauge cables to help prevent degradation over time.
-
Hosa PWP-461 IEC C7 Polar NEMA 1-15P Power Cable
Need a replacement power cord for gear with a polarized C8 inlet? Hosa's PWP-461 cable has a figure-8 C7 plug and an 8-foot cable to get you powered up.
-
Hosa 3-Wire Grounded Right Angle Power Cable
If space is tight in the back of your rack or keyboard rig, save space with this right-angled IEC power cord. It works with any gear that has a C14 inlet.
-
Hosa Power Cord, IEC C7 to NEMA 1-15P
Connect a C7 compatible appliance to 2-prong wall power with the Hosa IEC C7, which features OFC conductors for low resistance and a durable PVC jacket.