Welcome to zZounds. Get free shipping on instruments and musical equipment, easy zero-interest payment plans, and top-rated service.
Customer Kudos
"zZounds is hands down the greatest place to purchase musical equipment online, or anywhere else for that matter."
Search Results
-
Shure Centraverse CVG12-B/C Gooseneck Microphone
With a 12-inch gooseneck and a frequency response tailored for speech, Shure's Centraverse CVG12-B/C microphone is ideal for desk or lectern installations.
$114.00
- No Credit Check6 x$19.00
-
Shure Centraverse CVD-B Desktop Microphone Base
Mount a Shure CVG12-B/C or CVG18-B/C gooseneck microphone on this sturdy, low-profile base for tabletop installations. A 12-foot XLR mic cable is included.
$70.00- No Credit Check4 x$17.50
-
Shure Centraverse CVB-B/C Cardioid Boundary Microphone
Install the Centraverse CVB-B/C boundary microphone on a desk or podium for speech reinforcement. Its cardioid pattern rejects sound to the rear and sides.
$114.00
- No Credit Check6 x$19.00
-
Shure Beta 27 Condenser Microphone
Acoustically isolate drums, amp cabinets, and instruments with the Beta 27's tight supercardioid pattern. It's ideal for "live in the studio" recordings.
$419.00
- 8 x$52.38
- No Credit Check6 x$69.83
-
Shure Beta 181 Side Address Instrument Condenser Microphone
Fit this ultra-compact condenser anywhere in or around a drum kit. Interchangeable capsules come in cardioid, supercardioid, omni, or bidirectional.
$519.00
- 8 x$64.88
- No Credit Check6 x$86.50
-
Shure ARPWC Case for Nexadyne RPW Microphone Capsule Head
This no-nonsense case protects your Shure wireless Nexadyne capsules from dirt, debris, or drops in a lightweight and sleek housing.
-
Shure AMV-PC Phone Clamp and Microphone Clip for MV88 Plus
Made to fit the Shure Motiv MV88+ Video Kit, this genuine Shure replacement phone clamp and mic clip make it easy to mount your MV88+ microphone.
-
Shure AMVL-FUR Rycote Mini-Windjammer for MVL
Recording outdoors with a Shure MOTIV MVL lavalier mic? Add this mini-sized Rycote windscreen to protect your mic from wind noise and capture cleaner tracks.
-
Shure AMV88-FUR Rycote Windjammer for MV88
Recording outdoors with your Shure MOTIV MV88? Add this Rycote Windjammer furry windscreen to protect your microphone and keep wind noise out of your tracks.
-
Shure A98D Drum Microphone Mount for Beta98 and SM98A
Designed for the Shure Beta 98 and SM98A drum microphones, this mount includes a gooseneck adapter for fast, flexible mic placement over a drum rim.
$71.95- No Credit Check4 x$17.99
-
Shure A83W Foam Windscreen for Shure VP83/VP83F
A little foam goes a long way. This genuine Shure A83W replacement foam windscreen fits your Shure VP83 or VP83F shotgun mic, keeping wind noise at bay.
-
Shure A15RF RF Filter XLR In/Out
Got a long XLR cable run picking up AM radio? Solve it with Shure's in-line RF filter. The A15RF passes phantom power, so it can be used with condenser mics.
-
Shure A15HP High-Pass Filter
Cut the rumble! When you don't want frequencies below 100 Hz muddying your signal, roll them off right at the source with this XLR in-line high-pass filter.
-
Shure A15AS Switchable In-Line Audio Attenuator
Prevent a high-output mic or hot line-level signal from overloading your mixer -- the Shure A15AS in-line attenuator reduces your signal by 15, 20, or 25 dB.
$50.95- No Credit Check4 x$12.74
-
Hosa MSB-521BK Tripod Microphone Stand
Reliability, stability, and durability make Hosa's MSB-521BK microphone stand an ideal choice for performers and musicians either on stage or in the studio!
-
Hosa MSB-382 Tripod Base Short Microphone Stand
Whether you're looking for a kick drum mic stand or just a flexible option, this stable and low-profile design will get the job done!
$54.95- No Credit Check4 x$13.74
-
Hosa MMH-346 Quad Microphone Holder
Put four mics within easy reach. This handy attachment accommodates up to four handheld microphones on a single mic stand -- keeping your stage neater.
-
Hosa MIT-176 XLR Female to Female TS 1/4" Impedance Transformer
Need to plug an XLR microphone into a guitar amp's 1/4" input? Use this impedance transformer to connect lo-Z XLR microphone cables to hi-Z instrument jacks.
-
Hosa MIT-156 Impedance Matcher Transformer, XLR-3F to 1/8" TRS
You can plug an XLR microphone into a 1/8" stereo audio input when you add this impedance-matching adapter. It's ideal for connecting XLR mics to camcorders.
-
Hosa MIT-129 Female TS 1/4" to XLR Male Impedance Transformer
No Hi-Z instrument jack? Use this impedance-matching transformer to plug a high-impedance 1/4" guitar or bass cord into your mixer's low-impedance XLR input.