Audio-Technica AT2010 Handheld Condenser Vocal Microphone

Standard stage dynamic mic isn't cutting it? Brighten up any vocals and slice through the mix with Audio-Technica's AT-2010 handheld cardioid condenser mic.

Overview

The AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.

Features:

- Extended frequency response and superior transient response for smooth, natural sonic characteristics
- High SPL handling and wide dynamic range provide unmatched versatility
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal and construction for years of trouble-free service
- Quiet-Flex stand clamp provides silent, flexible microphone positioning

Specs

Element: Fixed-charge back plate permanently polarized condenser

Polar Pattern: Cardioid

Frequency Response: 40-20,000 Hz

Open Circuit Sensitivity: –48 dB (3.9 mV) re 1V at 1 Pa

Impedance: 100 ohms

Maximum input sound level: 136 dB SPL, 1 kHz at 1% T.H.D.

Dynamic range (typical): 113 dB, 1 kHz at Max SPL

Signal-to-noise ratio: 71 dB, 1 kHz at 1 Pa

Phantom power requirements: 48V DC, 2 mA typical

Weight: 233g (8.2 oz)

Dimensions: 179.1 mm (7.05 in.) long,
50.8 mm (2.00 in.) maximum body diameter

Output connector: integral 3-pin XLRM-type

Accessories furnished: AT8470 Quiet-Flex stand clamp for 5/8 in.-27 threaded stands; 5/8 in.-27 to 3/8 in.-16 threaded adapter; soft protective pouch

Audio Technica case style: T7

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 1 lbs; Shipping Dimensions: 10 x 5 x 3 in; Manufacturer Part Number (MPN): AT2010

Documents and Manuals

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Brochure

Reviews

Submitted September 9, 2010

Audio-Technica AT2010 Mic Customer Review

Overall:

(see rating details)

i would replace it with another if lost etc.

Sound

IN A LIVE SITUATION ,WE HAVE USED THE Audio-Technica AT2010 on all 7 vocalist ... we had great results.. the mic cuts thru the mix.. and the vocals were clear and clean.. we did use a pop filter on these mics .. we also used these for some recording and are very satisfied with them

Features

using this for live or studio ,these will be perfect mics and a great value

Ease of Use

this is a mic, it not rocket science to get these mics to sound good for both male or female vocals

Value

this is worth the selling price

Manufacturer Support

never dealt with the company

The Wow Factor

its a mic, they really do not have much sex appeal