Vestax PDX-3000 MK2 Digital Active Direct-Drive DJ Turntable

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Vestax PDX-3000 MK2 Digital Active Direct-Drive DJ Turntable, Main
Vestax PDX-3000 MK2 Digital Active Direct-Drive DJ Turntable, Connections
Vestax PDX-3000 MK2 Digital Active Direct-Drive DJ Turntable, Main Vestax PDX-3000 MK2 Digital Active Direct-Drive DJ Turntable, Connections
zZounds Gear Experts Say...
Choose from Performance mode, with stabilized speed -- or MIX mode, which allows you to precisely control RPM manually, on the versatile Vestax PDX-3000 MK2.

The super sleek Vestax PDX-3000 MK2 incorporates the feature set of the PDX-2000 while adding Torque Simulator adjustment, a new digital servo that enables MIDI control.

A Powerful Motor and Arm

Vestax's Anti Skipping Tone-arm System ensures high sound quality and stable playback by reducing the inner and outer force of the needle, suppressing horizontal vibrations.

The PDX-3000MK2's direct drive DC motor has powerful torque of 4.7CN/cm maximum, and reaches a constant speed rate within 0.5 seconds from pushing the start/stop button. The PDX-3000's motor is controlled with a digital servo. This servo keeps the motor rotating no matter how heavily the pitch is changed, the reverse button is pushed or the platter is pulled back.

New High-Precision Platter

With an advanced digital servo in combination, Vestax has cast a new mold to optimize the balance between the platter weight and rotary inertia moment. This enables the DJ to perform with higher stability and accuracy.

Digital Torque Simulator

The digital servo firmware is the brain of the control circuitry. Two control modes can be selected for the DJ's preference. Performance mode maintains the stabilized speed and rapid acceleration/deceleration, while MIX mode enables you to control precise RPM with the slightest touch to the platter.

Strong Body Material

The ultra strong, high pressure foamed ABS plastic that constructs the body is strong against feedback and highly resistant to impact.

The insulators… read more (the feet) are filled with rubber for absorbing shock, and have airspace inside for better low frequency feedback absorption. read less

- Turntable motor: Direct drive
- Quartz Start Time: 0.5sec. (33 1/3rpm) 70 degrees
- Torque: Maximum 2.7kg/cm
- Breaking System: Electrical breaking
- S/N ratio: 78dB (IEC 98WTD)
- RPM: 33 1/3rpm, 45rpm
- Fine Pitch: +/-10 (100mm FADER)
- Ultra Pitch: +/-50 (45mm FADER)
- Wow flatter: Below 0.07W.R.M.S
- Tone arm: Anti Skipping Tone arm system
- Tone arm balance: Tracing hold
- Height adjustment range: Maximum 9mm
- Needle pressure range: 0 - 7g
- Stylus light: DC12V 20mA replaceable
- Speed lock: Quartz lock
- Remote control: Start/stop mini jack
- MIDI control: MIDI terminal
- Dimensions (W x H x D): 454 x 162 x 365 mm(W)162(H)365(D)mm
- Weight: 9.5 kg
- Power: AC100V 50/60Hz
- Power consumption: 10 W

For support or warranty questions, please contact the manufacturer:
Manual

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer