
Shure WL184M Supercardioid Lavalier Microphone, TQG/TA4F Connector
Available here with a TA4F connector, the WL184m updates Shure's staple WL184 supercardioid lav mic with higher max SPL and lower noise in a tiny housing.
$139.00
- No Credit Check6 x$23.17
- No Credit Check4 x$34.75
Shure WL184 Supercardioid TQG Lavalier Microphone
No longer available at zZounds

zZounds Gear Experts Say...
Need a lavalier mic that rejects ambient noise? Shure's WL184 lav offers a tight 115-degree supercardioid pickup pattern, and a TQG TA4 4-pin mini connector.
Overview
The Shure WL184 is a lavalier electret condenser mics designed for use with a wireless body-pack transmitter. Each mic has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. Included tie clip can be rotated in 90 degree intervals for placement flexibility.
WL184 (Supercardioid): Recommended for sound reinforcement applications requiring high rejection of ambient noise and narrow pickup angle. Use of windscreen highly recommended. Pickup angle: 115 degrees.
WL184 (Supercardioid): Recommended for sound reinforcement applications requiring high rejection of ambient noise and narrow pickup angle. Use of windscreen highly recommended. Pickup angle: 115 degrees.
Specs
- Type: Condenser (electret bias)
- Frequency Response: 50 to 17,000 Hz
- Output Impedance: 1800 ohms
- Sensitivity (1 Pa = 94 dB SPL): WL184: -44.5 dBV/Pa
- Maximum Sound Pressure Level: WL184: 129.5 dB SPL
- Output Noise (A-weighted): WL184: 27.0 dB SPL
- Dynamic Range: 102.5 dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
- Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter
- Frequency Response: 50 to 17,000 Hz
- Output Impedance: 1800 ohms
- Sensitivity (1 Pa = 94 dB SPL): WL184: -44.5 dBV/Pa
- Maximum Sound Pressure Level: WL184: 129.5 dB SPL
- Output Noise (A-weighted): WL184: 27.0 dB SPL
- Dynamic Range: 102.5 dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
- Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Phone: 800-516-2525
Email: service@shure.com
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.