Shure SM86 Cardioid Condenser Stage Vocal Microphone
![Shure SM86 Cardioid Condenser Stage Vocal Microphone, Blemished, Main](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/sm86_large-31fed54e71dc7551d30553737794a514.jpg)
Deliver studio-quality sound with this cardioid condenser vocal mic. The Shure SM86 is ideal for live performance and built to survive the rigors of touring.
Overview
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in 3-point shock mount minimizes handling noise, and a 2-stage pop filter reduces wind and breath "pop" noise. The SM86 is an excellent selection for use with both stage monitors and personal in-ear monitors.
- Tailored frequency response for a clear reproduction of vocals
- Rugged construction withstands the rigors of touring sound
- Cardioid polar pattern minimizes unwanted background noise
- Excellent choice for stage monitors and personal in-ear monitors
- Built-in 3-point shock mount minimizes handling noise
- 2-stage "pop" filter reduces wind and breath noise
Features:
- Condenser cartridge for studio-quality sound- Tailored frequency response for a clear reproduction of vocals
- Rugged construction withstands the rigors of touring sound
- Cardioid polar pattern minimizes unwanted background noise
- Excellent choice for stage monitors and personal in-ear monitors
- Built-in 3-point shock mount minimizes handling noise
- 2-stage "pop" filter reduces wind and breath noise
Specs
Transducer Type: Condenser (electret bias)
Frequency Response: 50 to 18,000 Hz
Polar Pattern: Cardioid
Output Impedance:
150 Ohms at 1 kHz
Recommended minimum load impedance: 600 Ohms
Sensitivity (at 1,000 Hz)
Open Circuit Voltage: 50 dBV/Pa (3.15 mV)
Output Clipping Level
1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
Maximum SPL (at 1,000 Hz)
1000 Hz load (1% THD): 147 dB
Self-Noise: 23 dB typical, A-weighted
Dynamic Range (1000 Hz): 124 dB (maximum SPL to A-weighted noise level)
Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651)*
*S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise A-weighted.
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
Power: Phantom Supply Requirement 11 to 52 VDC, positive at both pins 2 and 3
Current Drain: 5.2 mA
Connector: 3-pin (XLR) professional audio
Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille
Dimensions: 24 x 49 x 183 mm (.95 x 1.92 x 7.2 in.)
Net Weight: 278 grams (9.8 oz.)
Environmental Conditions:
Operating: -18 to 60 degrees C (0 to 135 degrees F) (relative humidity <90%)
Storage: -29 to 74 degrees C (20 to 165 degrees F) (relative humidity <80%)
Certification:
Eligible to bear CE Marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments.
Furnished Accessories:
Break Resistant Microphone Clip A25D
Microphone Bag 26A13
5/8 in. to 3/8 in. Thread Adapter 31A1856
Optional Accessories:
Phantom Power Supply PS1A
Shock Stopper Isolation Mount A55M, A55HM
Popper Stopper Windscreen A85WS
7.6 m (25 ft.) Cable C25F
Frequency Response: 50 to 18,000 Hz
Polar Pattern: Cardioid
Output Impedance:
150 Ohms at 1 kHz
Recommended minimum load impedance: 600 Ohms
Sensitivity (at 1,000 Hz)
Open Circuit Voltage: 50 dBV/Pa (3.15 mV)
Output Clipping Level
1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
Maximum SPL (at 1,000 Hz)
1000 Hz load (1% THD): 147 dB
Self-Noise: 23 dB typical, A-weighted
Dynamic Range (1000 Hz): 124 dB (maximum SPL to A-weighted noise level)
Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651)*
*S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise A-weighted.
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.
Power: Phantom Supply Requirement 11 to 52 VDC, positive at both pins 2 and 3
Current Drain: 5.2 mA
Connector: 3-pin (XLR) professional audio
Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille
Dimensions: 24 x 49 x 183 mm (.95 x 1.92 x 7.2 in.)
Net Weight: 278 grams (9.8 oz.)
Environmental Conditions:
Operating: -18 to 60 degrees C (0 to 135 degrees F) (relative humidity <90%)
Storage: -29 to 74 degrees C (20 to 165 degrees F) (relative humidity <80%)
Certification:
Eligible to bear CE Marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments.
Furnished Accessories:
Break Resistant Microphone Clip A25D
Microphone Bag 26A13
5/8 in. to 3/8 in. Thread Adapter 31A1856
Optional Accessories:
Phantom Power Supply PS1A
Shock Stopper Isolation Mount A55M, A55HM
Popper Stopper Windscreen A85WS
7.6 m (25 ft.) Cable C25F
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 1.25 lbs
- Shipping Dimensions: 10 x 5 x 4 in
- Manufacturer Part Number (MPN): SM86
- Blemished
- Shipping Weight: 1.25 lbs
- Shipping Dimensions: 10 x 5 x 4 in
- Warehouse Resealed
- Shipping Weight: 1.25 lbs
- Shipping Dimensions: 10 x 5 x 4 in
- Manufacturer Part Number (MPN): SM86
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com
Phone: 800-516-2525
Email: service@shure.com
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(44 ratings)
Submitted April 2, 2017 by Ricky Williams in Houston, TX
"Everything I've wished for in a mic"
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
I received this a few days ago and used have used it on a couple of my gigs now. Right off the bat I was blown away by how full it sounds. I regularly use an SM58, and I've used a few high-dollar Sennheiser mics as well. The SM86 blows them all out of the water. This has the nice big, warm, fat sound you know and love about the SM58, mixed with the beautiful high-end detail you get from the expensive Sennheisers. This was the first mic I was able to just plug in and use with a flat EQ (at least for my voice).
All in all it's a fantastic mic. I prefer it over the Beta 87 hands down.
Musical Background:
Professional cover musician
Musical Style:
Acoustic, rock, pop, reggae, hip hop, country
7 of 7 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Blemished
What is Blemished?
$159.95
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.