Shure MX4LPDF/C Cardioid Gooseneck Microphone

This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Shure MX4LPDF/C Cardioid Gooseneck Microphone, 10 inch, Action Position Front
Shure MX4LPDF/C Cardioid Gooseneck Microphone, 10 inch, Action Position Front

The MX410 surface mount version is a gooseneck microphone with a Bi-Color LED or light ring status display. It has a 10" gooseneck and is suitable for boardrooms and other sites where aesthetics are important.

Features:

- Gooseneck length: 10 inch / 25.4 cm
- Low profile, aesthetic design
- Wide dynamic range and smooth frequency response
- RF filtering with CommShield technology
- Status indicator: Bi-Color LED at gooseneck bottom or red light ring on gooseneck top
- Capsule options: None, Cardioid, Supercardioid

Preamplifier Options:
- MX400DP: Desktop Base for MX405, MX410 and MX415 models
- MX890: Wireless Desktop Base for MX405, MX410 and MX415 models
- MX400SMP: Surface Mount Preamp for MX405, MX410 and MX415 models
- MXW8: Wireless Desktop Base for MX405, MX410 and MX415 models
- ULXD8: Wireless Desktop Base for MX405, MX410 and MX415 models

-Type: Electret Condenser (electret bias)
-Frequency Response: 50-17000 Hz
-Polar Pattern:
- MX405/C, MX410/C, MX415/C: Cardioid
- MX405/S, MX410/S, MX415/S: Supercardioid
-Output Impedance: EIA Rated at 150 Ohm (170 Ohm actual)
-Output Configuration: Active Balanced
-Sensitivity (@ 1 kHz, open circuit voltage):
- Cardioid: -35 dBV/Pa (18 mV)
- Supercardioid: -34 dBV/Pa (21 mV)
-Maximum SPL (1 kHz at 1% THD, 1 kOhm load):
- Cardioid: 121 dB
- Supercardioid: 120 dB
-Self Noise (A-weighted):
- Cardioid: 28 dB SPL
- Supercardioid: 27 dB SPL
-Signal-to-Noise Ratio (Ref. 94 dB SPL at 1 kHz):
- Cardioid: 66 dB
- Supercardioid: 68 dB
- Mini-shotgun: 68 dB
-Dynamic Range (1 kOhm load, @ 1 kHz): 93 dB
-Common Mode Rejection: 10 to 100,000 kHz, 45 dB, minimum
-Clipping Level at 1% THD: -8 dBV (0.4 V)
-Polarity:
- 3-pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- 5-pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
-Weight:
- MX405: 0.054 kg (0.119 lbs)
- MX410: 0.068 kg (0.150 lbs)
- MX415: 0.07 kg (0.154 lbs)
- MX400DP: 0.516 kg (1.138 lbs)
- MX400SMP: 0.125 kg (0.275 lbs)
-Logic Connections:
- LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
- LOGIC OUT: Active low (=1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kO).
-Mute Switch Attenuation: -50 dB minimum
-Cable: MX400DP, 6.1 m (20 ft) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
-Operating Temperature: -18-57*C (0-135*F)
-Storage Temperature: -29-74*C (-20-165*F)
-Relative Humidity: 0-95%
-Phantom Power: 48-52 V DC, 8.0 mA
Dimensions and Weight in Packaging
10 inch
Shipping Weight: 0.7 lbs
Shipping Dimensions: 25 x 6 x 3 in
Manufacturer Part Number (MPN): MX410LPDF/C
15 inch
Shipping Weight: 0.75 lbs
Shipping Dimensions: 25 x 6 x 3 in
Manufacturer Part Number (MPN): MX415LPDF/C

For support or warranty questions, please contact the manufacturer:
Phone: 800-516-2525
Email: service@shure.com

Be the first to rate and review this product.

10 inch

$251.00
Easy Payment Plans, No Interest (Ever)
Reserve Now
Preorder Today
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to