Sennheiser EW IEM G4 Wireless IEM System with ASI 3DME Earphones Bundle

No longer available at zZounds
Get everything you need for high fidelity in-ear monitoring, including the pristine 3DME BT G2 in-ear monitor earphones, with this Sennheiser + ASI bundle!

This bundle combines the Sennheiser EW IEM G4 wireless in-ear monitor system with Audio's 3DME BT G2 in-ear monitor earphones. Together, the Sennheiser EW IEM G4 and ASI Audio 3DME create a wireless IEM system that's easy to set up, with miniature microphones on the earpieces so you get the ambient sound that's missing from other in-ear monitors. No more pulling an earpiece out to hear the room!

ASI Audio 3DME BT G2 Active Ambient In-Ear Monitor Earphones:

Clearly hear your mix and the sound of the room! With full-bandwidth MEMS microphones on each side, 3DME Gen 2 in-ears let you hear exactly what you need.

Now musicians can make changes to their performance environments without compromising their connection to bandmates, audiences, or the acoustics of the room. ASI Audio 3DME in-ear monitors amplify hearing wellness for your career into the future with clear, uncompromising sound. Use in full ambient mode with the integrated binaural microphones, or blend in your monitor mix, restoring the intimacy and connection of your performance lost with traditional IEMs.

The rechargeable 3DME BT bodypack mixer/amplifier integrates with any wireless personal monitor system, combining the monitor mix feed with the 3DME IEM ambient mics to add 3D stage sound to the monitor mix. A 12-inch stereo jumper cable is included to connect the 3DME bodypack to a wireless receiver pack. Full adjustment of EQ, ambient balance, and limiter settings is available via the free iOS or Android app read more over Bluetooth.

Sennheiser EW IEM G4 in-ear monitor system:

Engineered for pro live sound, Sennheiser's EW IEM G4 system lets you take full control over your performance -- everywhere, every day. Sennheiser G4 In-Ear Monitoring Sets make your gig an extraordinary experience -- not just for your audience, but also for you.

Sennheiser EW IEM G4 Features:

- Half-rack stereo transmitter in an all-metal housing with OLED display for full control
- Improved, easier and faster wireless synchronization between transmitter and receiver via infrared backlit IR area that makes it more obvious where to hold the components for fast sync
- Compatible with Sennheiser WSM control software for flexible frequency allocation
- Up to 16 compatible channels
- Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range
- Transmission range: up to 100 meters / 330 feet
- High RF output power (up to 50 mW, adjustable in three steps 10/30/50) depending on country regulations

What's in the Box:

Sennheiser EW IEM G4:
- SR IEM G4 stereo transmitter
- EK IEM G4 stereo receiver
- IE 4 earphones
- 2 AA batteries
- rod antenna
- GA 3 rackmount set
- quick guide
- safety guide
- manufacturer declaration sheet
- power supply

ASI Audio 3DME:
- 3DME Active Ambient in-ear monitors
- 3DME Bodypack controller w/Lithium ion battery
- 3-pairs foam ear tips
- Stereo jumper cable
- USB-C charging cable
- Carrying case
- Earpiece cleaning tool
- Shirt clip
read less

SR In-Ear Monitor G4 Transmitter Specifications:- Receiving Frequencies:
- Max. 1680 receiving frequencies, adjustable in 25 kHz steps
- 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation
- 1 frequency bank with up to 12 programmable channels
- Switching Bandwidth: Up to 42 MHz
- Nominal/Peak Deviation: +/-24 kHz / +/-48 kHz
- MPX Pilot Tone (Frequency/Deviation): 19 kHz/ +/-5 kHz
- Frequency Stability: +/-10 ppm
- Antenna Output: BNC sockt, 50 O
- RF Output Power at 50 0 Switchable:
- Low: typ. 10 mW
- Standard: typ. 30 mW
- High: typ. 50 mW
- Compander System: Sennheiser HDX
- AF Frequency Response: 25 Hz to 15 kHz
- AF Input:
- BAL AF IN L (I) +MONO/
- BAL AF IN R (II)
- 2x XLR-3/1/4" (6.3 mm) jack combo socket, electronically balanced
- Temperature range: -10 *C to +55 *C
- Power supply: 12 V DC
- Current Consumption: max. 350 mA
- Dimensions: Approx. 202 x 212 x 43 mm
- Weight: Approx. 980 g

Sennheiser EK In-Ear Monitor G4 Receiver Specifications:
- Frequency Range: 516 - 558 MHz
- Receiving Frequencies:
- Max. 1680 receiving frequencies, adjustable in 25 kHz steps
- 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation
- 6 frequency banks with up to 16 programmable channels
- Switching Bandwidth: up to 42 MHz
- Nominal/Peak Deviation: +/-24 kHz / +48 kHz
- Receiver Principle: Adaptive diversity
- Sensitivity (HDX, Peak Deviation):< 4 uV, typ. 1.6 uV for 52 dBA rms S/N
- Adjacent Channel Selection: Typically = 65 dB
- Intermodulation Attenuation: Typically = 70 dB
- Blocking: = 80 dB
- Squelch: 5 to 25 dBuV, adjustable in steps of 2 dB
- Pilot Tone: Squelch (can be switched off)
- Compander System: Sennheiser HDX
- Signal-To-Noise ratio (1 mV, peak deviation): approx. 90 dBA
- Total Harmonic Distortion: = 0.9 %Switchable
- Output Power at 2.4V, 5% THD, Nominal Deviation: 2 x 100 mW at 32 ohms
- High Boost: +8 dB at 80 kHz
- Limiter: -18 dB to -6 dB, adjustable in steps of 6 dB, can be switched off
- Temperature Range: -10 *C to +55 *C
- Power Supply: 2 AA batteries, 1.5 V or BA 2015 accupack
- Nominal Voltage: 3 V battery / 2.4 V rechargeable battery
- Current Consumption at Nominal Voltage: approx. 140 mA with transmitter switched off: = 25 uA
- Operating Time: approx. 4 to 6 hours (depending on volume level)
- Dimensions: Approx. 82 x 64 x 24 mm
- Weight (incl. batteries): approx. 125 g

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer