RF Venue DFin Diversity Fin Antenna for Wireless Systems
Improve signal clarity and reduce dropouts on your wireless mics! Just connect the RF Venue DFin to the BNC antenna ports on any brand wireless receiver.
$649.00
- 12 x$54.08
- 8 x$81.13
- No Credit Check6 x$108.17
- No Credit Check4 x$162.25
RF Venue DFin Diversity Fin Antenna for Wireless, Standard Version
No longer available at zZounds
Improve the signal clarity of your wireless mics even in tough RF environments by connecting the RF Venue Diversity Fin antenna to your receiver.
Overview
The patented Diversity Fin antenna is the flagship RF Venue product. It's portable, simple to operate, compatible with any brand, and pushes diversity microphone systems to perform their best in the toughest RF environments. To use, just connect both the A and B ports on any antenna distributor or wireless microphone receiver and point toward the stage. The result is an antenna that dramatically improves system performance in the space of only one antenna. And since only one unit is needed for diversity reception -- not two -- you'll get optimum diversity coverage for much less.
Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone… read more system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure. read less
Improve reception anywhere.
The Diversity Fin reduces signal dropouts in venues large and small. Integrators love it because it saves money on installs, blends in with its environment, and never has to be reconfigured. Live sound pros love it because it sets up and breaks down in seconds. Film and broadcast pros love it because it fits on bags or carts for shoots anywhere in the world.An advanced antenna tuned for wireless audio
By co-locating two types of antennas at 90 degrees, the Diversity Fin captures vertically and horizontally polarized waves -- rather than waves from two different locations. The probability of dropouts is significantly reduced, switching noise disappears, and the likelihood of cross-linear signal fades is reduced to practically zero.Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone… read more system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure. read less
Specs
- Operating frequency: 470-698 MHz
- Average return loss: -9.4 dBm
- Impedance: 50 Ohm
- Mount: Wallmount flange
- Operating temperature: -23*C-54*C
- Connector(s): (2) BNC female
- LPDA:
- Beam width: 140* azimuth
- F/B ratio: -8 dBm
- F/S ratio: -5 dBm
- Gain: 5 dBd
- DIPOLE:
- Beam width: 100* azimuth
- F/B ratio: -5 dBm
- F/S ratio: -13 dBm
- Gain: 1.8 dBd
- Average return loss: -9.4 dBm
- Impedance: 50 Ohm
- Mount: Wallmount flange
- Operating temperature: -23*C-54*C
- Connector(s): (2) BNC female
- LPDA:
- Beam width: 140* azimuth
- F/B ratio: -8 dBm
- F/S ratio: -5 dBm
- Gain: 5 dBd
- DIPOLE:
- Beam width: 100* azimuth
- F/B ratio: -5 dBm
- F/S ratio: -13 dBm
- Gain: 1.8 dBd
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Web: https://www.audio-technica.com/en-us/support/category/product-support/
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Web: https://www.audio-technica.com/en-us/support/category/product-support/
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.