QSC PL340 Powerlight 3 Series Power Amplifier
No longer available at zZounds
Get up to 4000 watts of clean, efficient QSC power on tap. This high-performance amplifier's QSC DataPort lets you connect your existing digital processor.
Overview
The QSC PL340 is the ultimate analog power amplifier designed for the most demanding live audio users in tour rigs or fixed installations.
- Flow-thru air path and solid aluminum heat sinks for maximum cooling
- DataPort supports remote computer control and/or external DSP-4 modules
- Detented gain controls with 1 dB steps for precise calibration
- Removable knobs with lock-out security plate to prevent unauthorized tampering
- User defeatable clip limiters and selectable low-frequency filter per channel (3 Hz, 30 Hz, or 50 Hz)
- Three selectable input gains (26 dB, 32 dB, or 1.2 V)
- Front and rear panel LEDs indicate status of switch settings at a glance
- Parallel Dataport, XLR/M and XLR/F connectors for simple loop-through connectivity
- Neutrik Speakon and "Touch Proof" binding post outputs
- Neutrik Powercon power cable remains secure on the road
Features:
- PowerLight switchmode power supply for highest efficiency and improved audio performance- Flow-thru air path and solid aluminum heat sinks for maximum cooling
- DataPort supports remote computer control and/or external DSP-4 modules
- Detented gain controls with 1 dB steps for precise calibration
- Removable knobs with lock-out security plate to prevent unauthorized tampering
- User defeatable clip limiters and selectable low-frequency filter per channel (3 Hz, 30 Hz, or 50 Hz)
- Three selectable input gains (26 dB, 32 dB, or 1.2 V)
- Front and rear panel LEDs indicate status of switch settings at a glance
- Parallel Dataport, XLR/M and XLR/F connectors for simple loop-through connectivity
- Neutrik Speakon and "Touch Proof" binding post outputs
- Neutrik Powercon power cable remains secure on the road
Specs
- Power Rating Stereo Mode:
8Ohm EIA 1 kHz 1% THD - 800W
4Ohm EIA 1 kHz 1% THD - 1250W
2Ohm EIA 1 kHz 1% THD - 2000W
- Power Rating Bridged Mono:
8Ohm EIA 1 kHz 1% THD - 2600W
4Ohm EIA 1 kHz 1% THD - 4000W
- Damping Factor: Not Specified By Manufacturer
- Input Sensitivity: 26dB Setting - 3.92V, 32dB Setting - 1.96V
- Input Impedance: > 10kOhm balanced, or unbalanced
- Gain: 36.4dB
- Frequency Response: 20Hz to 20kHz, +/- 0.2dB
- Signal-to-Noise Ratio: -105dB
- Total Harmonic Distortion (THD) : 0.02% @ 2Ohm, 0.005-0.01% @ 4Ohm, 0.002-0.01% @ 8Ohm
- Input Connections: Input: XLR Male, XLR Female and 3-pin detachable terminal blocks (1 each per channel) DataPort: HD-15, input signal in parallel with XLR input connectors
- Output Connectors: Output: Neutrik Speakon (ch 1 wired to both channels) and 5-way binding posts
- Controls Front Panel: AC Power Switch, Gain Controls, 21 detents, 1 dB steps (each channel)
- Controls (Rear) : Input Mode: Bridge (Yellow), Stereo (Green), or Parallel (Orange), Gain / Sensitivity: 26dB (Orange), 32dB (Green), or 1.2V (Yellow), High Pass (each channel): 3Hz (Off), 30Hz (Yellow), or 50Hz (Orange), Clip Limiter (each channel): Off, On (Yellow)
- Indicators: Clip Limiter (each channel): Off, On (Yellow)
- Cooling: Flow-thru air path and solid aluminum heat sinks
- Power Consumption: 120V 50/60Hz - 12A, 230V 50Hz - 7A
- Dimensions (W x H x D) : 19 x 3.5 x 15.63" (48.3 x 8.9 x 39.7cm)
- Weight: 22 lbs (15.2kg)
8Ohm EIA 1 kHz 1% THD - 800W
4Ohm EIA 1 kHz 1% THD - 1250W
2Ohm EIA 1 kHz 1% THD - 2000W
- Power Rating Bridged Mono:
8Ohm EIA 1 kHz 1% THD - 2600W
4Ohm EIA 1 kHz 1% THD - 4000W
- Damping Factor: Not Specified By Manufacturer
- Input Sensitivity: 26dB Setting - 3.92V, 32dB Setting - 1.96V
- Input Impedance: > 10kOhm balanced, or unbalanced
- Gain: 36.4dB
- Frequency Response: 20Hz to 20kHz, +/- 0.2dB
- Signal-to-Noise Ratio: -105dB
- Total Harmonic Distortion (THD) : 0.02% @ 2Ohm, 0.005-0.01% @ 4Ohm, 0.002-0.01% @ 8Ohm
- Input Connections: Input: XLR Male, XLR Female and 3-pin detachable terminal blocks (1 each per channel) DataPort: HD-15, input signal in parallel with XLR input connectors
- Output Connectors: Output: Neutrik Speakon (ch 1 wired to both channels) and 5-way binding posts
- Controls Front Panel: AC Power Switch, Gain Controls, 21 detents, 1 dB steps (each channel)
- Controls (Rear) : Input Mode: Bridge (Yellow), Stereo (Green), or Parallel (Orange), Gain / Sensitivity: 26dB (Orange), 32dB (Green), or 1.2V (Yellow), High Pass (each channel): 3Hz (Off), 30Hz (Yellow), or 50Hz (Orange), Clip Limiter (each channel): Off, On (Yellow)
- Indicators: Clip Limiter (each channel): Off, On (Yellow)
- Cooling: Flow-thru air path and solid aluminum heat sinks
- Power Consumption: 120V 50/60Hz - 12A, 230V 50Hz - 7A
- Dimensions (W x H x D) : 19 x 3.5 x 15.63" (48.3 x 8.9 x 39.7cm)
- Weight: 22 lbs (15.2kg)
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-772-2834
Web: http://qsc.com/support
Phone: 800-772-2834
Web: http://qsc.com/support
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.