PreSonus CDL12P Constant Directivity Loudspeaker (1000 Watts)






zZounds Gear Experts Say...
This speaker looks totally different -- because it is! Stack CLD12Ps in a constant curvature array for clear, natural, consistent sound throughout your room.
Overview
The result of years of research and development, the PreSonus CDL12P powered loudspeaker combines the best attributes of point source and line array technology using a unique constant-directivity design that radiates a highly focused pattern with consistent SPL throughout the frequency-response range, both on- and off-axis. With the CDL12P, the eight 2-inch high-frequency drivers arc over a single 12-inch woofer, comparable to the coaxial driver configuration found on top studio monitors. The result is better sonic coherence across the entire venue. Regardless of how many CDL12Ps you stack, you're working with a shared acoustic axis -- and non-turbulent sound propagating throughout the room. The result is clear, articulate speech intelligibility and natural music reproduction. The CDL12P is portable and can be used on individually or in an arrayed pair on a tripod stand, atop an 18-inch PreSonus subwoofer, or in a flown installation of up to 6 CDL12Ps in a vertical array, making it a great choice for touring bands and mobile DJs, as well as for fixed installs in small and midsize venues.
- 15-degree vertical directivity can be extended from 30 up to 90 with additional arrayable CDL12Ps
- 12-inch long-throw LF transducer with 2.5-inch voice coil
- Low crossover point minimizes comb filtering and enhances line array intelligibility
- 500 x… read more 500 watts Class D power for high SPLs and lightning-fast transient response
- Locking AC Connector in and out
- Balanced XLR input and output
- Signal, -3 dB, Limiter Protection, and Clip monitoring
- Easy-to-use DSP Controls: Array Mode (1-6 boxes), 90 Hz High Pass Filter, Sub Mode (Off, CDL18s, ULT18, or AIR18s)
- 2-position pole mount for use with up to two CDL12P on a tripod or atop an 18-inch PreSonus subwoofer (Note: a CDL18s must be used for when two CDL12Ps are arrayed)
- Integrated flyware to create an array of up to six CDL12P's
- Easy-to-handle, compact form factor and 63 lb. weight
read less
Features:
- Continuous Directivity constant curve array with eight 2-inch cone drivers disperse sound an amazing 120 degrees horizontally- 15-degree vertical directivity can be extended from 30 up to 90 with additional arrayable CDL12Ps
- 12-inch long-throw LF transducer with 2.5-inch voice coil
- Low crossover point minimizes comb filtering and enhances line array intelligibility
- 500 x… read more 500 watts Class D power for high SPLs and lightning-fast transient response
- Locking AC Connector in and out
- Balanced XLR input and output
- Signal, -3 dB, Limiter Protection, and Clip monitoring
- Easy-to-use DSP Controls: Array Mode (1-6 boxes), 90 Hz High Pass Filter, Sub Mode (Off, CDL18s, ULT18, or AIR18s)
- 2-position pole mount for use with up to two CDL12P on a tripod or atop an 18-inch PreSonus subwoofer (Note: a CDL18s must be used for when two CDL12Ps are arrayed)
- Integrated flyware to create an array of up to six CDL12P's
- Easy-to-handle, compact form factor and 63 lb. weight
Specs
Type: Active 2-way
LF Driver: 12" (2.5" Voice Coil)
HF Driver: 8x 2" (1" Voice Coil)
Amplifier Type: Class D
Total System Power: 2000W Peak, 1000W Program (500W RMS)
LF Driver Power: 1000W Peak, 500W Program (250W RMS)
HF Driver Power: 1000W Peak, 500W Program (250W RMS)
Frequency Range (+/- 3dB): 48 Hz – 18 kHz
Crossover Frequency: 420 Hz
Maximum Peak SPL: 130 dB
Horizontal Coverage: 120Ëš
Vertical Coverage: 15Ëš per enclosure
Input: Line (XLR)
Output: Direct Line Out (XLR)
Mains Connection: Locking 3 conductor AC connector In and Out
DSP Functions: HPF On/Off, No. arrayed boxes, PreSonus subwoofer configuration preset
Indicators: Signal, -3 dB, Limiter, Clip
Enclosure: 15 mm Polypropylene
Mounting: Dual-position pole mount (0Ëš and 7.5Ëš), Integrated Rigging (10:1 load)
Dimensions (H x W x D): 18.6" x 20.8" x 17.5" (473 mm x 529 mm x 444.5 mm)
Weight: 63 lbs (28.6 kg)
Optional Accessories: CDL12-Tote Tote Bag
LF Driver: 12" (2.5" Voice Coil)
HF Driver: 8x 2" (1" Voice Coil)
Amplifier Type: Class D
Total System Power: 2000W Peak, 1000W Program (500W RMS)
LF Driver Power: 1000W Peak, 500W Program (250W RMS)
HF Driver Power: 1000W Peak, 500W Program (250W RMS)
Frequency Range (+/- 3dB): 48 Hz – 18 kHz
Crossover Frequency: 420 Hz
Maximum Peak SPL: 130 dB
Horizontal Coverage: 120Ëš
Vertical Coverage: 15Ëš per enclosure
Input: Line (XLR)
Output: Direct Line Out (XLR)
Mains Connection: Locking 3 conductor AC connector In and Out
DSP Functions: HPF On/Off, No. arrayed boxes, PreSonus subwoofer configuration preset
Indicators: Signal, -3 dB, Limiter, Clip
Enclosure: 15 mm Polypropylene
Mounting: Dual-position pole mount (0Ëš and 7.5Ëš), Integrated Rigging (10:1 load)
Dimensions (H x W x D): 18.6" x 20.8" x 17.5" (473 mm x 529 mm x 444.5 mm)
Weight: 63 lbs (28.6 kg)
Optional Accessories: CDL12-Tote Tote Bag
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 68.25 lbs
- Shipping Dimensions: 24 x 23 x 21 in
- Manufacturer Part Number (MPN): 2779100202
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 225-216-7887
Web: https://support.presonus.com
Phone: 225-216-7887
Web: https://support.presonus.com
New
$999.99
- 12 x$83.33
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.