Pinnacle Microphones Fat Top II Ribbon Mic Pair

Get that "fat head" ribbon sound in glorious stereo. Made with Lundahl 2913 transformers for wider frequency range, this pair includes a Blumlein mount bar.

The Fat Top II is a short ribbon passive microphone with a Lundahl upgrade that delivers a smooth, warm, rich, fat, rounded tone. Produces a well-rounded sound without the need to EQ out the brittle or sharp highs. This microphone will roll off the high frequencies that will help with perceived warmth. The bi-directional polar pattern picks up sound essentially equally from both faces with a large null between faces, ideal for isolating sound sources.

It's frequency and sensitivity response deliver pristine audio results. Translates natural analog sound into the digital domain, giving warmth and smoothness to what might be a cold and sterile digital recording. Versatile enough to handle any vocals or instruments in recording and live sound application. Can be used in pairs in a Blumlein set up to pick up the entire room. Fat Top II comes fitted with the upgraded Lundahl LL2913 transformer, adding to the already quality hardware delivering extended frequency ranges. This gives the mic improved definition, lower floor and higher ceiling. Best suited for guitar cabinets, piano, brass and percussion instruments.

Handling Instructions:
Ribbon microphones are not designed to withstand excessive air-pressure. The Ribbon is made up of a very thin corrugated aluminum ribbon under light tension. Use for close mic'ing of a kick-drum or vocals can cause damage to the ribbon. Use of a Pop-Filter will reduce the air-pressure and increase life of microphone. When not in use, the microphone(s) read more should be cased to protect from unwanted air-pressure and/or damage. This product is Phantom Power safe.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

- Type: Ribbon (velocity) Microphone
- Ribbon Type & Dimensions: 99.99% Pure Aluminum, 2.5 microns, 1 3/4" (L) X 3/16" (W)
- Polar Pattern: Symmetrical Figure 8
- Sensitivity: -54.4 dB (1.5 (mV/Pa)
- Frequency Response: 30 to 15 KHz (+/- 3dB)
- Impedance: <=200 Ohms
- Recommended Load Impedance: 1000 Ohms
- Max.SPL (1% THD @1000 Hz): 135 dB
- Equivalent Noise Level: to IEC 268-4 (A weighted) 17dB
- S/N ratio: re 1Pa: 70 dB
- Connector: 3-Pin Male XLR
- Size: Diameter: 3" (O.D. grill), overall length 8 1/2", 1 7/8" (O.D. body)
- Transformer: Standardly fitted with LL2913 Lundahl Transformer
Dimensions and Weight in Packaging
Black, Pair
Shipping Weight: 13 lbs
Shipping Dimensions: 20 x 14 x 6 in
Manufacturer Part Number (MPN): D-FTII-ST-S
Brown, Pair
Shipping Weight: 13 lbs
Shipping Dimensions: 20 x 14 x 6 in
Manufacturer Part Number (MPN): D-FTII-ST-G

For support or warranty questions, please contact the manufacturer:
Phone: (360) 623-0912
Email: sales@pinnaclemicrophones.com
Web: https://pinnaclemicrophones.com

Black, Pair

$979.00
  • 12 x  
    $81.58
  • 8 x  
    $122.38
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to