Peavey 6505 1992 Original Guitar Amplifier Head (120 Watts)
![Peavey 6505 1992 Original Guitar Amplifier Head (120 Watts), New, main](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/Peavey_6505_1992_Original_Guitar_Amplifier_Front_03619250-27fb97b14a8f781d1719db66281c7614.jpg)
![Peavey 6505 1992 Original Guitar Amplifier Head (120 Watts), New, view](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/Peavey_6505_1992_Original_Guitar_Amplifier_Right_03619250-750cde066b8d5ef76dfccfec5bd51f79.jpg)
![Peavey 6505 1992 Original Guitar Amplifier Head (120 Watts), New, view](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/Peavey_6505_1992_Original_Guitar_Amplifier_Left_03619250-9df8a0c187aeca70312558f088cdf5d1.jpg)
![Peavey 6505 1992 Original Guitar Amplifier Head (120 Watts), New, view](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/Peavey_6505_1992_Original_Guitar_Amplifier_Back_03619250-bb0a28e78592d70f9c4f3a0148d36578.jpg)
Created for players who crave massive metal tones, the 6505 has become a legend. The 1992 Original model pushes 120 massive watts of super-saturated sound.
Overview
The Peavey 6505 1992 Original is the result of extensive research and development to produce the ultimate rock 'n' roll guitar amp, featuring super rock crunch, harmonic-rich sustain, and screaming metal drive like you've never heard from another amp. The undisputed go-to guitar amplifier for scores of rock, hardcore and metal bands for its raw tone, relentless power and road-proven reliability, the 6505 features five 12AX7 preamp tubes and four 6L6GC power amp tubes, with presence and resonance controls and three-band EQ for taming its notorious tone. These features, combined with its classic ultra-high gain preamp capabilities and monstrous 120 W power section, result in an amp with awesome stage presence and enough volume for any gig. For maximum flexibility, a footswitchable effects loop, preamp output and bright/crunch voicing switches (rhythm channel) have also been included. Because of its singular design and distinguished tone, the 6505 is in a category all its own.
- 2-channel preamp switchable on front panel or remote footswitch
- Rhythm channel: pre-/post-gain, bright and crunch switches
- Five 12AX7 preamp tubes and four 6L6GC power amp tubes
- Channels share 3-band EQ
- High and low gain inputs
- Presence and resonance controls
- Switchable post-EQ effects loop
- Preamp output
- Footswitch included
- Lead channel: pre-/post-gain
- Universal AC Input Selector for worldwide use
Features:
- 120 watts (RMS) into 16, 8, or 4 ohms (switchable)- 2-channel preamp switchable on front panel or remote footswitch
- Rhythm channel: pre-/post-gain, bright and crunch switches
- Five 12AX7 preamp tubes and four 6L6GC power amp tubes
- Channels share 3-band EQ
- High and low gain inputs
- Presence and resonance controls
- Switchable post-EQ effects loop
- Preamp output
- Footswitch included
- Lead channel: pre-/post-gain
- Universal AC Input Selector for worldwide use
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
- Power Amplifier Section:
- Rated Power & Load: 120 W RMS into 16, 8, or 4 ohms
- Power @ Clipping: (Typically @ 5% THD, 1 kHz, 120 V AC line) 130 W RMS into 16, 8, or 4 ohms (Bias must be reduced to measure)
- Frequency Response: +0, -3 dB, 50 Hz to 20 kHz, @ 100 W RMS into 8 ohms
- Hum & Noise: Greater than 75 dB below rated power
- Power Amp EQ: Active Presence: +10 dB 2 kHz
- Active Resonance: +10 dB @ cabinet resonant frequency
- Power Consumption: (Domestic) 400 watts 50/60 Hz, 120 V AC
- Preamp Section: The following specs are measured @ 1 kHz with the controls preset as follows:
- Low & High EQ @ 0
- Bright out
- Lead & Rhythm Post @ 10
- Presence & Resonance @ 0 dB
- Nominal levels with Pre Gains @ 5
- Minimum levels with Pre Gains @ 10
- Preamp High Gain Input:
- Impedance: Very high Z, 470K ohms
- Lead Channel (with channel select in):
- Nominal Input Level: -80 dBV, -1 mV RMS
- Minimum Input Level: 92 dBV. /025 mV RMS
- Clean Channel (with channel select out):
- Nominal Input Level: +34 dBV, 20 mV RMS
- Minimum Input Level: -50 dBV, 3 mV RMS
- Maximum Input Level: 0 dBV, 1.0 V RMS (Subtract 16 dB with Crunch switch in)
- Preamp Low Gain Input: (-6 dB pad)
- Impedance: High Z 44K ohms
- All levels are increased by +6 dB
- Effects Send:
- Load Impedance: 47K ohms or grater
- Nominal Output: -10 dBV, 300 mV RMS
- Effects Return:
- Impedance: Very high Z, 470K ohms
- Designed Level: -10 dBV, 300 mV RMS
- Preamp Output:
- Load Impedance: 47K ohms or grater
- Nominal Output: +10 dBV, 3 V RMS
- Remote Footswitch: Special 2 button unit with LED indicators (supplied) Channel select & Effects loop bypass
- System Hum & Noise @ Nominal Level: (Clean channel) 120 Hz to 20 kHz unweighted) Greater than 74 dB below rated power
- Equalization:
- Custom Low, Mid & High passive type EQ Push
- Bright, (Rhythm channel only)
- +6 dB @ 2 kHz
- Push Crunch (Rhythm channel only) Increases gain
- Rated Power & Load: 120 W RMS into 16, 8, or 4 ohms
- Power @ Clipping: (Typically @ 5% THD, 1 kHz, 120 V AC line) 130 W RMS into 16, 8, or 4 ohms (Bias must be reduced to measure)
- Frequency Response: +0, -3 dB, 50 Hz to 20 kHz, @ 100 W RMS into 8 ohms
- Hum & Noise: Greater than 75 dB below rated power
- Power Amp EQ: Active Presence: +10 dB 2 kHz
- Active Resonance: +10 dB @ cabinet resonant frequency
- Power Consumption: (Domestic) 400 watts 50/60 Hz, 120 V AC
- Preamp Section: The following specs are measured @ 1 kHz with the controls preset as follows:
- Low & High EQ @ 0
- Bright out
- Lead & Rhythm Post @ 10
- Presence & Resonance @ 0 dB
- Nominal levels with Pre Gains @ 5
- Minimum levels with Pre Gains @ 10
- Preamp High Gain Input:
- Impedance: Very high Z, 470K ohms
- Lead Channel (with channel select in):
- Nominal Input Level: -80 dBV, -1 mV RMS
- Minimum Input Level: 92 dBV. /025 mV RMS
- Clean Channel (with channel select out):
- Nominal Input Level: +34 dBV, 20 mV RMS
- Minimum Input Level: -50 dBV, 3 mV RMS
- Maximum Input Level: 0 dBV, 1.0 V RMS (Subtract 16 dB with Crunch switch in)
- Preamp Low Gain Input: (-6 dB pad)
- Impedance: High Z 44K ohms
- All levels are increased by +6 dB
- Effects Send:
- Load Impedance: 47K ohms or grater
- Nominal Output: -10 dBV, 300 mV RMS
- Effects Return:
- Impedance: Very high Z, 470K ohms
- Designed Level: -10 dBV, 300 mV RMS
- Preamp Output:
- Load Impedance: 47K ohms or grater
- Nominal Output: +10 dBV, 3 V RMS
- Remote Footswitch: Special 2 button unit with LED indicators (supplied) Channel select & Effects loop bypass
- System Hum & Noise @ Nominal Level: (Clean channel) 120 Hz to 20 kHz unweighted) Greater than 74 dB below rated power
- Equalization:
- Custom Low, Mid & High passive type EQ Push
- Bright, (Rhythm channel only)
- +6 dB @ 2 kHz
- Push Crunch (Rhythm channel only) Increases gain
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 57 lbs
- Shipping Dimensions: 29 x 14 x 13 in
- Manufacturer Part Number (MPN): 03619250
- with Slant Cab
- Shipping Weight: 148 lbs
- with Straight Cab
- Shipping Weight: 150.65 lbs
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us
Phone: 877-732-8391
Email: customerservice@peavey.com
Web: https://peavey.com/c/Contact-Us
New
$1,299.99
- 12 x$108.33
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.