Neumann KH 810 G Active Studio Subwoofer
![Neumann KH 810 G Active Studio Subwoofer, New, Action Position Front](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/x1_KH-805-810-Front_Neumann-Studio-Subwoofer_G_828275-b5b19460da95bace2eb2bee978f1c6c9.jpg)
![Neumann KH 810 G Active Studio Subwoofer, New, Action Position Side](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/x1_KH-805-810-Right_Neumann-Studio-Subwoofer_G_828276-6962cfc72d1ceeecd82a8182db41268f.jpg)
![Neumann KH 810 G Active Studio Subwoofer, New, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/x1_KH-810-Back_Neumann-Studio-Subwoofer_G_828277-6b4de6052b4c5635ff377b5da09b26fe.jpg)
![Neumann KH 810 G Active Studio Subwoofer, New, Action Position Front](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/x1_KH-810-Macro1_Neumann-Studio-Subwoofer_G_828278-e554a47da154cc9b385ee2df9d32b266.jpg)
![Neumann KH 810 G Active Studio Subwoofer, New, Action Position Front](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/x1_KH-810-Macro2_Neumann-Studio-Subwoofer_G_828279-dad546cc0b939d955265cf831cc5cecc.jpg)
Made for pro broadcast and postproduction studios, this 10" sub supports 8 channels of analog audio for mixing in any format, from mono to 7.1 surround.
Overview
The Neumann KH 810 G is a 7.1 analog bass managed studio subwoofer with very deep bass response down to 18 Hz, and a high maximum SPL of up to 110.7 dB. Answering rising demands for 7.1 and 3D productions, the KH 810 offers a 7.1 High Definition Bass Manager. The flexibility of this bypassable 7.1 bass manager means it is also compatible with all standard consumer formats from mono through to the latest 7.1 HD systems.
The KH 810 has a bypassable 7.1 High Definition Bass Manager with remote volume control, four routing modes, fourth order crossovers and adaptable acoustical controls. From Mono to 3D, there are uses for the KH 810 in many different system configurations.
Eight channels of analog ensure flexible interconnectivity for modern studios. Four-mode LFE-channel processing guarantees compatibility across all formats and industries. Forth-order crossovers and flexible acoustical controls allow for seamless system integration. Built-in volume control and a hardware remote control allow for centralized system control independent of the source, and the electronics can be remote located to reduce cabling. From Mono to 3D, there are uses for the KH 810 in many different system configurations.
- Increasing the maximum SPL of loudspeakers by up to 8 dB
- Decreasing harmonic and intermodulation distortion of loudspeakers
- Reproducing the LFE channel
- Reproducing the "Sub" signal of a bass managed multichannel source
- Making a Plane Wave Bass Array system
- Working as an extension for KH line subwoofer systems
- Wooden cabinet with a tough painted finish and high density rubber isolating feet
- Excellent self-damping properties leading to minimal cabinet resonances
- No standing wave resonances inside cabinet
- Reduced cabinet resonances
In-house modelled long-throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF), magnetic shielding, flow optimized die cast basket and robust built-in grille
- Damping of break up modes brings low distortion at high sound levels
- Linear pistonic motor gives a very low harmonic distortion even at high excursions
- Reduced air noise and improved rocking modes
- Grille protects against mechanical damage
Large high-capacity flow-optimized bass reflex ports
- Fast bass transient response
- Reduced bass compression at high output levels
-Can be flush mounted
XLR electronically balanced analogue inputs and outputs
- Standard interfacing to professional equipment
- Daisy chain output for subwoofer arrays
- 7.1 High Definition Bass Management
- Compatible with all systems from mono to 3D
- Bypassable 4th order 80 Hz active crossover for maximum compatibility with consumer reproduction systems
- Allows main loudspeakers to play louder and with lower distortion
Remote control
- NRC 1 and SEA 1 hardware remote control
- RS-232 control possible
LFE gain: 0 and +10 dB
Four routing modes:
- LFE to subwoofer and left/right
- LFE to subwoofer only up to 80 Hz
- LFE to subwoofer only up to 120 Hz
- LFE to subwoofer with no filtering - for daisy chaining subwoofers and external signal processing
systems
Wide range input gain and output level controls: Easier interfacing with signal sources
8-position phase control (with built in test tone), continuous low cut control and parametric equalizer
- More control in diverse acoustical environments
- Parametric equalizer is bypassable if not needed
Bass Management controls
- Bypassable
- Independent control of bass management bypass for front and back channels
- System volume control on/off
Universal switched-mode power supply (100 - 240 V)
- One version works in any country and robust to poor quality mains supply
- Electronics can be remotely powered on with two modes of operation (0 V and 12 V trigger)
Ground lift: Reduced noise in electrically noisy environments and over-comes ground loops
Sum output: Larger systems and Plane Wave Bass Arrays may be constructed using the Sum output
Low heat dissipation amplifiers with large headroom and overheat limiting
- Improved transient response
- Assured reliability and safety
Separate fast acting thermo limiter to protect the voice coil and power amplifier
- Soft clip and excursion limiters
- Increases system reliability
- Allows extraction of the maximum performance from the system
Installation flexibility: Remoteable electronics (REK 3) for ease of installation, less cabling, and convenience of use
read less
The KH 810 has a bypassable 7.1 High Definition Bass Manager with remote volume control, four routing modes, fourth order crossovers and adaptable acoustical controls. From Mono to 3D, there are uses for the KH 810 in many different system configurations.
Eight channels of analog ensure flexible interconnectivity for modern studios. Four-mode LFE-channel processing guarantees compatibility across all formats and industries. Forth-order crossovers and flexible acoustical controls allow for seamless system integration. Built-in volume control and a hardware remote control allow for centralized system control independent of the source, and the electronics can be remote located to reduce cabling. From Mono to 3D, there are uses for the KH 810 in many different system configurations.
Improving Lateral Consistency
The latest amplifier technology and acoustical components have been used to ensure the most accurate sound reproduction possible. Robust drivers, a rock-solid cabinet, and carefully designed ports guarantee a tight, articulate, and distortion-free low… read more frequency reproduction, even at high replay levels. Using the sum output, Plane Wave Bass Array (PWBA) techniques acoustically improves lateral consistency in the listening area. The bass extends down to 18 Hz.Match to Your Monitors
The KH 810 subwoofer is designed to complement Neumann's extensive range of monitors, and can be used on its own, or daisy-chained to make larger systems capable of higher SPL. The KH 810 can be used in music, broadcast, and post production studios for tracking, mixing, and mastering. The cabinet can be positioned next to a wall or flush mounted into a wall due to the front mounted port, and can be mixed freely in multichannel systems with other loudspeakers from Neumann's range.Applications:
- Bass extension for loudspeakers down to 18 Hz- Increasing the maximum SPL of loudspeakers by up to 8 dB
- Decreasing harmonic and intermodulation distortion of loudspeakers
- Reproducing the LFE channel
- Reproducing the "Sub" signal of a bass managed multichannel source
- Making a Plane Wave Bass Array system
- Working as an extension for KH line subwoofer systems
Features:
Computer mechanically modeled cabinet design using Low resonance Integral Molding (LRIM) materials- Wooden cabinet with a tough painted finish and high density rubber isolating feet
- Excellent self-damping properties leading to minimal cabinet resonances
- No standing wave resonances inside cabinet
- Reduced cabinet resonances
In-house modelled long-throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF), magnetic shielding, flow optimized die cast basket and robust built-in grille
- Damping of break up modes brings low distortion at high sound levels
- Linear pistonic motor gives a very low harmonic distortion even at high excursions
- Reduced air noise and improved rocking modes
- Grille protects against mechanical damage
Large high-capacity flow-optimized bass reflex ports
- Fast bass transient response
- Reduced bass compression at high output levels
-Can be flush mounted
XLR electronically balanced analogue inputs and outputs
- Standard interfacing to professional equipment
- Daisy chain output for subwoofer arrays
- 7.1 High Definition Bass Management
- Compatible with all systems from mono to 3D
- Bypassable 4th order 80 Hz active crossover for maximum compatibility with consumer reproduction systems
- Allows main loudspeakers to play louder and with lower distortion
Remote control
- NRC 1 and SEA 1 hardware remote control
- RS-232 control possible
LFE gain: 0 and +10 dB
Four routing modes:
- LFE to subwoofer and left/right
- LFE to subwoofer only up to 80 Hz
- LFE to subwoofer only up to 120 Hz
- LFE to subwoofer with no filtering - for daisy chaining subwoofers and external signal processing
systems
Wide range input gain and output level controls: Easier interfacing with signal sources
8-position phase control (with built in test tone), continuous low cut control and parametric equalizer
- More control in diverse acoustical environments
- Parametric equalizer is bypassable if not needed
Bass Management controls
- Bypassable
- Independent control of bass management bypass for front and back channels
- System volume control on/off
Universal switched-mode power supply (100 - 240 V)
- One version works in any country and robust to poor quality mains supply
- Electronics can be remotely powered on with two modes of operation (0 V and 12 V trigger)
Ground lift: Reduced noise in electrically noisy environments and over-comes ground loops
Sum output: Larger systems and Plane Wave Bass Arrays may be constructed using the Sum output
Low heat dissipation amplifiers with large headroom and overheat limiting
- Improved transient response
- Assured reliability and safety
Separate fast acting thermo limiter to protect the voice coil and power amplifier
- Soft clip and excursion limiters
- Increases system reliability
- Allows extraction of the maximum performance from the system
Installation flexibility: Remoteable electronics (REK 3) for ease of installation, less cabling, and convenience of use
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
Free field frequency response ±6 dB: 17 - 600 Hz
Free field frequency response ±3 dB: 8 - 300 Hz
Reproduction accuracy between 50 Hz and 100 Hz (100%, 80%, 50% of subwoofers produced): ±1.20; ±0.54; ±0.28 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): <20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space: 95 dB SPL (>45 Hz)
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 110.7 dB SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range): 112 dB SPL
Analog input(s): 8 x XLR: analog electronically balanced
Analog input impedance: >13k Ohms
Max. input level: +19 dBu
Common mode rejection ratio (CMRR): > 56 dB @ 15 kHz
Crosstalk (1 kHz), level matching: -95 dB; ±0.1 dB
Volume control: NRC 1 hardware remote or RS-232
Volume control range; resolution: 118 dB; 0.25 dB
Analog dynamic range; THD+N: 119 dB(A); <0.001% (-100 dB)
Signal routing modes: LFE 80+re-routing; LFE 80 Hz; LFE 120 Hz; Wide
LFE Gain: 0 / +10 dB
Analog output(s): 8 x XLR; analog electronically balanced
Input gain control (sensitivity): +2 - -12 dB
Output level control (output level in 1 m based on 0 dBu input level): 100; 114 dB SPL
Controller design: Analog, active
Crossover frequency: 80 Hz
Crossover slope: 24 dB/oct; 4th order
Equalization: Low cut: 30 Hz; 0 … -12 dB
Equalization: Parametric EQ: Gain: +4 - -12 dB
Equalization: Parametric EQ: Frequency: Bypass; 20 - 120 Hz
Equalization: Parametric EQ: Q: 1 - 8
Phase: 0; 45; 90; 135 and 0/180 deg
Protection circuitry: Peak and thermo limiters
Infrasonic filter: frequency; slope: 6.5 Hz; 12 dB/oct.
Remote control: RJ45 connector: Via NRC1 remote control (optional): volume for all channels; bass management on/off; LFE gain 0/10 dB.Via RS-232: more parameters remote controllable
Display: On; Normal Operation: Red LED
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute: Red LED
Display: Bass Management on: Green LED
Output power woofer amplifier (THD+N with limiter deactivated: 10%): 200 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%): 160 W
Mains Power Supply: input voltage; frequency: 220-240 / 100-120 V (switchable); 50/60 Hz
Power consumption (230 V / 100 V): Idle: 20 W
Power consumption (230 V / 100 V): Full output: 290 W
Cabinet material: Wood cabinet, aluminum electronics panel
Cabinet surface finish; color (front / back): Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
Operating conditions: +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing
Transport/storage conditions: -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing
Woofer: 265 mm (10") with magnetic shielding and protecting black metal grille
Product dimensions (height x width x depth): 360 x 330 x 645 mm (14.2" x 13" x 25.4")
External net volume: 76.6 liters
Product weight: 26 kg (57 lbs 5 oz)
Cabinet weight when electronics remote located: 24.2 kg (53 lbs 6 oz)
Free field frequency response ±3 dB: 8 - 300 Hz
Reproduction accuracy between 50 Hz and 100 Hz (100%, 80%, 50% of subwoofers produced): ±1.20; ±0.54; ±0.28 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): <20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space: 95 dB SPL (>45 Hz)
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz): 110.7 dB SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range): 112 dB SPL
Analog input(s): 8 x XLR: analog electronically balanced
Analog input impedance: >13k Ohms
Max. input level: +19 dBu
Common mode rejection ratio (CMRR): > 56 dB @ 15 kHz
Crosstalk (1 kHz), level matching: -95 dB; ±0.1 dB
Volume control: NRC 1 hardware remote or RS-232
Volume control range; resolution: 118 dB; 0.25 dB
Analog dynamic range; THD+N: 119 dB(A); <0.001% (-100 dB)
Signal routing modes: LFE 80+re-routing; LFE 80 Hz; LFE 120 Hz; Wide
LFE Gain: 0 / +10 dB
Analog output(s): 8 x XLR; analog electronically balanced
Input gain control (sensitivity): +2 - -12 dB
Output level control (output level in 1 m based on 0 dBu input level): 100; 114 dB SPL
Controller design: Analog, active
Crossover frequency: 80 Hz
Crossover slope: 24 dB/oct; 4th order
Equalization: Low cut: 30 Hz; 0 … -12 dB
Equalization: Parametric EQ: Gain: +4 - -12 dB
Equalization: Parametric EQ: Frequency: Bypass; 20 - 120 Hz
Equalization: Parametric EQ: Q: 1 - 8
Phase: 0; 45; 90; 135 and 0/180 deg
Protection circuitry: Peak and thermo limiters
Infrasonic filter: frequency; slope: 6.5 Hz; 12 dB/oct.
Remote control: RJ45 connector: Via NRC1 remote control (optional): volume for all channels; bass management on/off; LFE gain 0/10 dB.Via RS-232: more parameters remote controllable
Display: On; Normal Operation: Red LED
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute: Red LED
Display: Bass Management on: Green LED
Output power woofer amplifier (THD+N with limiter deactivated: 10%): 200 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%): 160 W
Mains Power Supply: input voltage; frequency: 220-240 / 100-120 V (switchable); 50/60 Hz
Power consumption (230 V / 100 V): Idle: 20 W
Power consumption (230 V / 100 V): Full output: 290 W
Cabinet material: Wood cabinet, aluminum electronics panel
Cabinet surface finish; color (front / back): Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
Operating conditions: +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing
Transport/storage conditions: -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing
Woofer: 265 mm (10") with magnetic shielding and protecting black metal grille
Product dimensions (height x width x depth): 360 x 330 x 645 mm (14.2" x 13" x 25.4")
External net volume: 76.6 liters
Product weight: 26 kg (57 lbs 5 oz)
Cabinet weight when electronics remote located: 24.2 kg (53 lbs 6 oz)
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 47 lbs
- Shipping Dimensions: 30 x 19 x 18 in
- Manufacturer Part Number (MPN): 503951
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 860-598-7555
Web: https://www.neumann.com/en-en/contact/
Phone: 860-598-7555
Web: https://www.neumann.com/en-en/contact/
New
$2,895.00
- 18 x
- 12 x$241.25
- 8 x$361.88
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.