Mojotone Solderless Tele 4-Way Mod Guitar Wiring Harness
![Mojotone Solderless Tele 4-Way Mod Guitar Wiring Harness, Blemished, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/Z4T4W731_2_788416-aaf79e32945dff2df8902fd839b4868b.jpg)
![Mojotone Solderless Tele 4-Way Mod Guitar Wiring Harness, Blemished, Main](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/Z4T4W731-97afb4da3c9e2a9c6d09a321aa4dd7c9.jpg)
![Mojotone Solderless Tele 4-Way Mod Guitar Wiring Harness, Blemished, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/Z4T4W731_788415-da2072486a390baa9b7cf54c01f85363.jpg)
Soup-up the sound of your favorite Tele with this drop-in wiring harness. Quickly and easily swap out pickups using the push-in solderless wire connections.
Overview
The Mojotone Solderless Tele 4-Way Mod Guitar Wiring Harness provides an easy install solution and reliable connections with the simple push and release of a button, all while offering a superior quality electronic upgrade for your guitar.
No bulky plugs or add-ons are needed for the solderless harness to work. Just strip back your existing wires from your pickups and guitar, insert them into the solderless connector, and you're done!
- Vintage-quality USA-branded components (Switchcraft, Mojotone, Oak Grigsby, and CTS)
- Smooth custom taper, CTS industrial potentiometers with solid brass bushings and the tightest tolerances available
- Handcrafted and hermetically sealed Mojotone Vitamin T oil-filled tone caps
- Handwired point-to-point by Mojotone in the USA
No bulky plugs or add-ons are needed for the solderless harness to work. Just strip back your existing wires from your pickups and guitar, insert them into the solderless connector, and you're done!
Features:
- Push-in solderless wire connection for quick installation and easy pickup swaps- Vintage-quality USA-branded components (Switchcraft, Mojotone, Oak Grigsby, and CTS)
- Smooth custom taper, CTS industrial potentiometers with solid brass bushings and the tightest tolerances available
- Handcrafted and hermetically sealed Mojotone Vitamin T oil-filled tone caps
- Handwired point-to-point by Mojotone in the USA
Specs
4-Way Mod Control Functions:
- Master Volume
- Master Tone
- 4-Way Switch
4-Way Switch:
- Position 1: Bridge
- Position 2: Bridge and Neck (Parallel) Standard Tele sound.
- Position 3: Neck
- Position 4: Neck and Bridge (Series) Fat humbucker tone!
Included:
- CTS 250k vintage taper solid shaft potentiometers: 2
- Oak Grigsby USA 4-way lever switch (Switch tip sold separately): 1
- Switchcraft USA mono input jack: 1
- Mojotone Vitamin T Oil Filled .047uf capacitor: 1
- Treble Bleed (Preserves highs on volume control): 1
- Detailed wiring diagram and instructions: 1
Note: Guitars made overseas may require you to enlarge the holes for the larger US spec pots to fit. You will also need to change the metric knobs to inch sized set screw knobs and the switch tip. 4-way mod requires a separate wire from the neck pickup cover (if it has a cover) for shielding. If you don't have this wire, you can cut the jumper from the cover to the eyelet and solder a separate wire to the cover. Some control plates need the switch slot to be slightly elongated for the extra travel on the 4-way switch. This can be done with a small file or metal saw blade.
- Master Volume
- Master Tone
- 4-Way Switch
4-Way Switch:
- Position 1: Bridge
- Position 2: Bridge and Neck (Parallel) Standard Tele sound.
- Position 3: Neck
- Position 4: Neck and Bridge (Series) Fat humbucker tone!
Included:
- CTS 250k vintage taper solid shaft potentiometers: 2
- Oak Grigsby USA 4-way lever switch (Switch tip sold separately): 1
- Switchcraft USA mono input jack: 1
- Mojotone Vitamin T Oil Filled .047uf capacitor: 1
- Treble Bleed (Preserves highs on volume control): 1
- Detailed wiring diagram and instructions: 1
Note: Guitars made overseas may require you to enlarge the holes for the larger US spec pots to fit. You will also need to change the metric knobs to inch sized set screw knobs and the switch tip. 4-way mod requires a separate wire from the neck pickup cover (if it has a cover) for shielding. If you don't have this wire, you can cut the jumper from the cover to the eyelet and solder a separate wire to the cover. Some control plates need the switch slot to be slightly elongated for the extra travel on the 4-way switch. This can be done with a small file or metal saw blade.
- Dimensions and Weight in Packaging
- Blemished
- Shipping Weight: 1 lbs
- Shipping Dimensions: 10 x 8 x 3 in
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 910-259-7291
Email: Tech@mojotone.com
Phone: 910-259-7291
Email: Tech@mojotone.com
Reviews
Reviewers gave this product an overall rating of 1 out of 5 stars.
(1 ratings)
Submitted June 2, 2021 by a customer from gmail.com
"I won't buy monotone ever again"
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
Thanks MOJOTONE this i an a little late but I just remembered, I purchased this pre wired harness new.after installed the volume pot had a dragging sound you could feel and hear with amp off and also the sound came through the amp as well, NOW I get that this is non returnable because usually these items you need to use a soldering iron,,at which I am very good at using and could have made my own wiring harness,but this is a solderless unit,no soldering is required, so I took a chance and reached out to zZounds and they would not replace it,recommended i call mojotone after a long drawn out conversation they said send it back to us and we'll repair it ok...I sent it, item has disappeared..Thanks..I recommended 920D
of 1 people (0%) people found this review helpful. Did you?
Thanks for your opinion!
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.