Mackie SA1530Z 3-Way Active Loudspeaker (1300 Watts, 1x15 in.)

No longer available at zZounds
Tri-amplified with independent 1100W RMS low-frequency, 100W RMS mid-frequency, and 100W RMS high-frequency amps.

For when incredible accuracy and extreme output are a must, Mackie's flagship SAz Series represent the finest active loudspeaker systems on the market. These four newly developed "Super Active" loudspeakers improve upon Mackie's award-winning Active designs of the past with maximized power, re-calibrated electronics, high-definition neodymium drivers, and extensive acoustic design and tuning by the world-renowned Eastern Acoustic Works (EAW) engineering team.

SA1530Z Features:
Ultra high-output active system featuring integrated electronics and acoustic design by EAW loudspeaker team

Wide-dispersion, ultra-low distortion, high frequency horn design

Power On, Signal Present, Limiter and Thermal Protection LEDs

Weight balanced with carrying handles for easy portability

Optimized wide-dispersion WaveFront high/mid horn system

Tri-amplified, with independent 1100W RMS low-frequency, 100W RMS mid-frequency, and 100W RMS high-frequency amps

44mm (1.75 in.) neodymium high-frequency compression driver

152mm (6 in.) horn-loaded neodymium mid-frequency transducer

381mm (15 in.) LF woofer with high-temperature voice coil

Complete electronic and component circuitry protection

135dB SPL @ 1kHz/1 meter

Frequency response: 38Hz to 20kHz

Re-Engineered for Superior Performance
The new SAz Series Loudspeakers start with maximum power. The SA1530Z has 1300 watts RMS total. And Mackie made sure this power was translated into incredible accuracy with completely re-calibrated active electronics read more -- including precision crossovers, thermal and transducer protection, and electronic time-correction. These revamped electronics are coupled with new neodymium mid- and high-frequency drivers, delivering greater accuracy and increased output versus their previous ceramic-magnet models, yet weighing significantly less. And as the only premium active loudspeakers with optimized WaveFront horns, the SAz series' natural sound and ultra-wide dispersion are simply unparalleled in its class.

Precision-Tuned by EAW Loudspeaker Engineers
Because a loudspeaker is more than the sum of its parts, the new SAz Series Loudspeakers were developed and tuned exclusively by the EAW loudspeaker engineering team. This is the same team behind high-output loudspeaker systems for the Olympic games, the Super Bowl, and musical tours ranging from Usher to REM to Eric Clapton for over 25 years. The end result of their efforts is that the SAz Series loudspeakers function as highly efficient systems, optimizing acoustic, electronic, and mechanical designs to achieve the highest level of performance and value. Put simply, the new SAz series stand as the finest active loudspeaker systems in Mackie history, rivaling professional passive systems costing thousands more.

Three 3-Way Designs with Patented Wavefront High/Mid Horn
Mackie's top-of-the-line SA1530z, SA1232z and SA1532z employ several distinct elements to achieve their amazing accuracy and full, natural sound. For each model, frequencies above 3kHz are produced by a 1.75-inch neodymium compression driver, while a six-inch neodymium mid-range transducer operates between 700Hz and 3kHz eliminating the placement of a crossover point in the center of critical voice frequencies.

Additionally, all three models feature Mackie's optimized wide-dispersion WaveFront horn design -- a scientifically developed one-piece 90 x 40 degree horn that combines both mid- and high-frequency drivers. Unlike typical mid/high horn designs, the high-frequency section fires slightly downward into the six-inch mid-range driver's dispersion pattern, creating a focused, single wave front with excellent phase and power response characteristics. The resulting 90 x 40 degree dispersion pattern provides open, natural sound for the entire audience, even at extreme output levels.
read less

For support or warranty questions, please contact the manufacturer:
Phone: 800-898-3211
Email: support@mackie.com
Web: https://mackie.com/en/support/contact

Reviewers gave this product an overall rating of 5 out of 5 stars. (12 ratings)
Submitted June 19, 2006 by a customer from cgsound.com

"Holy crap- this thing sounds good!"

Overall: 5 out of 5 stars
(see rating details)
This review has been selected by our experts as particularly helpful.
I plan on keeping these for as long as they last, which appears it will be a very long time. The first set of mackies I got were purchased 2nd hand, and the only problem I've had with them so far is that the connector to one of the speakers came off during transport, but it was an easy fix.
Sound
You can't beat a 3-way speaker in terms of sound quality, especially with the vocals in the crucial mid-range.
Features
The cabinet is built pretty solid, quality connectors and all. But come on guys, this speaker weighs 111 lbs.- it would be awesome to have some wheels on the bottom so you could tilt it back and roll it around! The 4 handles come in handy though.
Ease of Use
Let's see: 1. connect power 2. connect line-level XLR from mixer output 3. flick the power switch. enough said.
Quality
only reason it's not getting a 10 is becuase one of the handles (the bottom one) had one of its screws missing- come on!
Value
Definately get what you pay for here- and you're getting a killer 3-way, self-powered speaker), though it is a bit pricey for the starving musician...
Manufacturer Support
Haven't had to deal with them yet, and this is my second pair of Mackie speakers.
The Wow Factor
It looks awesome! I love the new silver colored grilles and the blue LED on the front is always a plus! You now have 4 LEDs on the back (power, signal, limit, and thermal)- very nice addition!

Musical Background:

active musician, sound engineer for CGSOUND.com

Musical Style:

alternative, jazz, funk
13 of 13 people (100%) people found this review helpful. Did you?
Thanks for your opinion!

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer