Laney CUB8 Guitar Combo Amplifier (5 Watts, 1x8")
No longer available at zZounds


zZounds Gear Experts Say...
Get 5 watts of vintage tube tone from this mini amp's 8" HH speaker. The simple control panel allows you to control tone, volume, and Hi and LO input.
Overview
The Laney CUB8 is an all tube guitar amp with its roots fairly and squarely back in the very beginning of tube amp production. The design ethos behind the CUB amps is 'Small is Beautiful!' There are plenty of situations when small is king and having an amplifier like the Laney CUB8 allows you to get 'THAT' vintage sound.
The Laney CUB8 features a classic single-ended Class A design, and is loaded with a single ECC83 in the pre amp section and a single 6V6GT in the output section generating 5 watts RMS of vintage tube tone. The Laney CUB8's control panel is simplicity personified - a tone control, a volume control, Hi and LO input and that's your lot. The Laney CUB8 houses an HH speaker.
Using a Laney CUB8 is straightforward, plug in, dial in your tone and wind the volume up a little and the 6V6GT's respond in a bright, bouncy and brilliant fashion. Drive the output section harder and the increased 2nd and 3rd order harmonics give the tone a pronounced bottom end and a lovely lower mid.
The Laney CUB8 features a classic single-ended Class A design, and is loaded with a single ECC83 in the pre amp section and a single 6V6GT in the output section generating 5 watts RMS of vintage tube tone. The Laney CUB8's control panel is simplicity personified - a tone control, a volume control, Hi and LO input and that's your lot. The Laney CUB8 houses an HH speaker.
Using a Laney CUB8 is straightforward, plug in, dial in your tone and wind the volume up a little and the 6V6GT's respond in a bright, bouncy and brilliant fashion. Drive the output section harder and the increased 2nd and 3rd order harmonics give the tone a pronounced bottom end and a lovely lower mid.
Specs
Power RMS: 5 watts RMS
Inputs: Hi & Lo
Equalisation: Tone
Preamp Valves: 1 x ECC83
Output Valves: 1 x 6V6GT
Class: Class A single ended
Reverb: No
Footswitch: No
FX Loop(s): No
Impedance: 8 Ohm
Drivers: HH speaker
Weight: 6 Kg
Dimensions: Width 305mm x Height 301mm x Depth 205mm
Channel Controls: Tone, Volume
Inputs: Hi & Lo
Equalisation: Tone
Preamp Valves: 1 x ECC83
Output Valves: 1 x 6V6GT
Class: Class A single ended
Reverb: No
Footswitch: No
FX Loop(s): No
Impedance: 8 Ohm
Drivers: HH speaker
Weight: 6 Kg
Dimensions: Width 305mm x Height 301mm x Depth 205mm
Channel Controls: Tone, Volume
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 615-793-8787
Email: support@laney.co.uk
Phone: 615-793-8787
Email: support@laney.co.uk
Reviews
Reviewers gave this product an overall rating of 2 out of 5 stars.
(2 ratings)
Submitted January 12, 2015 by Bryan P in Westfield, MA
"Laney Cub 8"
Verified Purchaser
zZounds has verified that this reviewer purchased this specific product from us.
First shipment was damaged and returned due to poor packing. Replacement procedure very clear and quick. Second arrival damage free. As an apartment dweller, was hoping for a low watt tube practice amp to not disturb neighbors. The amp had an exorbitant amount of 60 cycle hum with my strat and tele. Tried cables - tried every outlet in apt with no luck. Tried changing the preamp tube in case it was bad, but it was not the problem. My home made head doesn't hum anywhere near this level.
Musical Background:
Guitar player
Musical Style:
All
9 of 11 people (82%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.