LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker, Action Position Back
LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker, Action Position Back
LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker, Action Position Back
LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker, Action Position Back
LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker, Action Position Back LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker, Action Position Back LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker, Action Position Back LD Systems Stinger MON8 AG 2 Powered Stage Monitor Speaker, Action Position Back
zZounds Gear Experts Say...
A crystal-clear stage monitor with a tiny footprint, the LD Systems Stinger MON8 AG 2 uses a coaxial speaker design for wide dispersion and minimal feedback.

The LD Stinger MON8 AG 2 is an especially compact active monitor with broad frequency response and a maximum sound-level pressure of 116dB for versatile use on stage.

The 8" coaxial speaker with an integral 1" HF driver attains a dispersion angle of 75x75 degrees, which is beneficial in multifaceted applications as a stage monitor. The coaxial configuration results in a very homogenous sound in the entire dispersion area plus very low susceptibility to feedback. The active monitor is driven by a Class AB power amplifier with an output power of 320W peak; short-circuit protection and a limiter ensure dependable operation.

The signal is connected and looped through using an XLR/jack combo socket and the XLR output. The rear connector panel is rounded out by a volume control, LED indicators, and the IEC power socket.

- Product type: PA loudspeaker
- Type: Actives
- Low/mid driver dimensions: 8"
- Woofer size: 203 mm
- Woofer type: coaxial loudspeaker
- Woofer magnet: Ferrite
- Woofer brand: Custom-made
- Woofer voice coil: 2"
- Woofer voice coil (mm): 50.8 mm
- HF driver dimensions: 1"
- HF Driver Size: 25.4 mm
- HF driver magnet: Ferrite
- HF driver brand: Custom-made
- HF driver voice coil: 1"
- HF Driver Voice Coil: 25.4 mm
- Amplifier: Class A/B
- Dispersion (H x V): 75 x 75 degrees
- RMS: 80 W
- Peak power: 320 W
- Frequency response: 90 - 20000 Hz
- Crossover frequency: 2400 Hz
- SPL (1W/1m): 97 dB
- Max. SPL (continuous): 111 dB
- Max. SPL (peak): 116 dB
- Protection circuits: limiter, short circuit
- Controls: On / Off, volume
- Indicators: Limit, Power
- Line Inputs: 1
- Line input connectors: 6.3 mm jack, XLR
- Line Outputs: 1
- Line output connectors: XLR
- Operating voltage: transformer
- Operating voltage: 230 V AC / 50-60 Hz
- Cabinet material: 15 mm Birch Plywood
- Cabinet construction: vented
- Monitor angle: 35 degrees
- Width: 320 mm
- Depth: 250 mm
- Height: 361 mm
- Weight: 10.6 kg
- Features: ergonomically shaped insert handles

For support or warranty questions, please contact the manufacturer:
Phone: 973-335-7888 x 207
Email: service.us@adamhall.com

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer