The JBL JRX215 2-Way PA Speaker gives you a rock solid and well-voiced unpowered PA speaker at a nice price. These will take line from pretty much any external amplified source or power amp you're using, and deliver 500 watts of power easily. And with no heavy onboard preamp, these speaker cabinets can do what they do best -- deliver great sound!

Standard I/O

The input section has 1 x Neutrik Speakon NL-4 combo jack and 1 x 1/4-inch TS phone jack.

Plenty of Power

The JRX215 handle 250 watts program, 1000 watts peak power and run with a nominal 8 ohm impedance. They are capable of achieving 128 dB SPL, so yes, they get really loud. Loud enough, at least, for any medium- to large-sized room and/or some outdoor applications (outdoor receptions, concerts in the park, etc).

15-Inch Woofer for Lots of Low-End

Open them up and you'll find a JBL 15-inch low-frequency driver inside with a 64mm (2.5-inch) diameter edgewound ribbon voice coil. Employed on other acclaimed JBL professional loudspeakers, this design provides more cross-sectional wire area to allow the power to flow more freely through this crucial section.

JBL Tweeter Covers the Highs

The JBL 2414H-C 25 mm (1-inch) polymer diaphragm compression driver delivers truly excellent high frequency performance that minimizes system noise and feedback. The compression driver is mounted on the proprietary Progressive Transition Waveguide to achieve maximal coverage with minimal distortion and tighter… read more frequency response. Overall, you've got a nominal dispersion of 90 degrees x 50 degrees when you use the JRX215s.

Features:

- JBL 2414H-C 25mm High Frequency Driver
- Progressive Transition Waveguide
- JBL M115-8A Low Frequency Driver
- 1 x Neutrik Speakon NL-4 input
- 1 x 1/4-inch TS input

Note: Unpowered speaker, requires separate power amplifier.

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

read less