JBL JRX212 2-Way Passive, Unpowered Loudspeaker
Its smooth frequency response, reduced distortion, and rugged enclosure makes the JBL JRX212 an affordable, professional choice for stage monitors.
Overview
The JBL JRX212 is a portable, twelve-inch, two-way speaker system designed specifically for live performance stage monitoring applications.
- JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
- The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region.
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
- Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
- The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. -SonicGuard protects the high frequency driver from excess power without interrupting the performance. -Non-resonant, all-steel handles are used.
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage. Dual-angle pole-mount socket allows the speaker to tilt 10*for more uniform audience… read more coverage.
Note: Unpowered speaker, requires separate power amplifier.
read less
Features:
- JBL 12" low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.- JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
- The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region.
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
- Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
- The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. -SonicGuard protects the high frequency driver from excess power without interrupting the performance. -Non-resonant, all-steel handles are used.
- Attractive 18-gauge hexagon perforated, steel grille protects components from damage. Dual-angle pole-mount socket allows the speaker to tilt 10*for more uniform audience… read more coverage.
Note: Unpowered speaker, requires separate power amplifier.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
Specs
Pole mount socket diameter: 1-3/8" (35 mm)
- Power Rating: 250 W / 1000 W
- Frequency Range (-10 dB) : 60 Hz - 20 kHz
- Frequency Response (+/-3 dB): 70 Hz - 19 kHz
- Sensitivity (@1m): 99 dB SPL (1w/1m)
- Nominal Impedance: 8 ohms
- Recommended Amplifier Power: 250 W to 500 W into 8 ohms
- Maximum SPL: 129 dB
- Nominal Dispersion: 90 degrees x 50 degrees
- Crossover Frequency: 1.8 kHz
- Mounting: 1-3/8" (35 mm) pole-mount socket
- Dimensions (H x W x D): 23" x 15.7" x 12.8"
- Weight: 19.5 kg (43 lb)
- High Frequency Driver: JBL 2414H-C 25mm (1 in) polymer diaphragm compression driver mounted on Progressive Transition Waveguide
- Low Frequency Driver: JBL M112-8
- Input Connectors: Neutrik Speakon NL-4 (x1); .25 in / TS phone jack (x1); parallel
- Power Rating: 250 W / 1000 W
- Frequency Range (-10 dB) : 60 Hz - 20 kHz
- Frequency Response (+/-3 dB): 70 Hz - 19 kHz
- Sensitivity (@1m): 99 dB SPL (1w/1m)
- Nominal Impedance: 8 ohms
- Recommended Amplifier Power: 250 W to 500 W into 8 ohms
- Maximum SPL: 129 dB
- Nominal Dispersion: 90 degrees x 50 degrees
- Crossover Frequency: 1.8 kHz
- Mounting: 1-3/8" (35 mm) pole-mount socket
- Dimensions (H x W x D): 23" x 15.7" x 12.8"
- Weight: 19.5 kg (43 lb)
- High Frequency Driver: JBL 2414H-C 25mm (1 in) polymer diaphragm compression driver mounted on Progressive Transition Waveguide
- Low Frequency Driver: JBL M112-8
- Input Connectors: Neutrik Speakon NL-4 (x1); .25 in / TS phone jack (x1); parallel
- Dimensions and Weight in Packaging
- Single Speaker
- Shipping Weight: 46.25 lbs
- Shipping Dimensions: 25 x 17 x 15 in
- Manufacturer Part Number (MPN): JRX212
- Pair
- Shipping Weight: 92.5 lbs
Note: Unpowered speaker, requires separate power amplifier.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 800-336-4525
Web: https://jblpro.com/en/support for pro audio, https://support.jbl.com for consumer/home audio
Phone: 800-336-4525
Web: https://jblpro.com/en/support for pro audio, https://support.jbl.com for consumer/home audio
Pair
$618.00
- 12 x$51.50
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.