Gunstreet Jazzmaster Wiring Harness

Want to get the most tone possible out of your Jazzmaster? Opt for this Gunstreet wiring harness to retain your high-end tone at lower volume levels.

Overview

Gunstreet kits are a perfect drop-in replacement for your Jazzmaster style guitar, whether you want to change how your instrument sounds, or just want to improve the durability they have something perfect for you!

Filter circuit: Green Treble Bleed (Modern High pass Filter) Often called a "Volume bleed", this circuit changes the modern wiring into a high pass filter. Get this kit if you like to use both your volume and tone control a lot and want more highs at lower volumes.

Features:

- Perfect drop-in replacement for a Jazzmaster style guitar
- Green Treble Bleed Mod (Modern High pass Filter)
- Changes the modern wiring into a high pass filter
- Delivers more highs at lower volumes
- Great if you like to use both your volume and tone control a lot

The Gunstreet Promise
Gunstreet takes their quality very seriously. That's why they only use real trained technicians who hand build each kit, and then send it through their proprietary testing process where they audio test every control, switch, or option to make sure that when you receive the item it's free of any hums, crackles, or pops!

All kits include a diagram as well as a simple "how to" on the Gunstreet website.

Specs

-Toggle Switch: Switchcraft L Angle
-Body cavity depth: 1" (25.4mm)
-Mounting hole diameter: 1/2" (12.70mm)
-Thread height: 7/32" (5.56mm)DHE Gunstreet Pots
-Taper Style: Custom Audio Taper
-Knob type: 18 spline Coarse knurling
-Shaft diameter: 3/8" (9.52mm)
-Thread type: 3/8"-32
-Threaded portion: 3/8" (9.52mm)
-Required mounting hole diameter: 3/8" (9.52mm)
- Capacitor Value: 1Meg +/-20% Capacitor
-Capacitor Brand: CDE
-Capacitor Model: "Orange Drop"
-Capacitor Value: 0.033uf+/-10%Neutrik Output Jack Specs
-Mounting hole diameter: 3/8" (9.52mm)
-Thread: 3/8 x 32
-Threaded portion height: 1/4" (6.35mm)

Requirements (Must Read)

This circuit cannot be used to "Splice" into a standard Rhythm circuit style layout. These are 2 completely different circuits.
Converting an Import guitar to US spec: Our US spec pots will require you to enlarge the stock metric pot holes to be 3/8th on your pickguard
Choosing our kits will require an 18th tooth "Coarse" Knurled knob

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 0.1 lbs; Shipping Dimensions: 8 x 4 x 3 in; Manufacturer Part Number (MPN): GSWH-JMNR-CJ-V