Gibson Custom Shop 1960 Les Paul Standard Reissue Electric Guitar (with Case)
No longer available at zZounds
CustomBucker pickups power this tone machine -- constructed just like a '60s Les Paul Standard, with Gibson's VOS process for an authentically aged look.
Overview
The Gibson Custom 1960 Les Paul Standard Reissue Electric Guitar is an impeccable reissue of one of the most revered and desired guitars ever produced. The 1960 Les Paul Standard Reissue is expertly crafted using a solid mahogany body and carved maple top along with its quarter-sawn mahogany neck with long-tenon neck joint. Gibson Custom's 20th Anniversary specifications including Kluson Deluxe machine heads, hot-hide glue neck fit, a Historic Truss Rod assembly with no tubing, accurate body and fingerboard binding color, and Custom Buckers give this reissue an incredible look, feel and tone.
The Gibson Custom Shop diligently studied vintage instruments, construction methods and materials used to get this reissue right. The end result is nothing short of one of the best guitar Gibson Custom has ever produced. The 1960 Les Paul Standard Reissue also features Gibson's proprietary VOS process, which yields a gently worn look and feel.
Gibson Custom's Custom Bucker accurately recreates the original PAFs of the late '50s, using Alnico III magnets and unequal turns of 42 AWG wire in each coil for that characteristic PAF bite. These pickups clean up beautifully at the guitar's volume controls, while Bumble Bee tone caps assist in that warm, singing woman tone when you roll back the tone controls. To top it all off, the 1960 Les Paul Standard Reissue plays superbly right out of its Custom Shop hardshell case thanks to a trip through one of Gibson's state-of-the-art Plek machines before… read more it leaves the Custom Shop floor.
- Custom Bucker Pickups are Gibson's most accurate recreation of the original 50's PAF pickups
- Hide Glue Neck fit which many argue has a different tone than synthetic glue
- Sperzel USA made tuners
- Aniline Dye results in superior wood grain presentation and depth of color read less
The Gibson Custom Shop diligently studied vintage instruments, construction methods and materials used to get this reissue right. The end result is nothing short of one of the best guitar Gibson Custom has ever produced. The 1960 Les Paul Standard Reissue also features Gibson's proprietary VOS process, which yields a gently worn look and feel.
Gibson Custom's Custom Bucker accurately recreates the original PAFs of the late '50s, using Alnico III magnets and unequal turns of 42 AWG wire in each coil for that characteristic PAF bite. These pickups clean up beautifully at the guitar's volume controls, while Bumble Bee tone caps assist in that warm, singing woman tone when you roll back the tone controls. To top it all off, the 1960 Les Paul Standard Reissue plays superbly right out of its Custom Shop hardshell case thanks to a trip through one of Gibson's state-of-the-art Plek machines before… read more it leaves the Custom Shop floor.
Features:
- Accurate vintage color fingerboard and body binding is a darker cream color to match the original- Custom Bucker Pickups are Gibson's most accurate recreation of the original 50's PAF pickups
- Hide Glue Neck fit which many argue has a different tone than synthetic glue
- Sperzel USA made tuners
- Aniline Dye results in superior wood grain presentation and depth of color read less
Specs
Body:
- Top: Carved Maple AAA top
- Back: Solid, Non-Weight Relieved Mahogany Back
- Binding: Single-ply Cream Binding on Top
Neck:
- Species: 1-piece Mahogany Neck with Long Neck Tenon
- Profile: 1960 Slim taper
- Truss Rod: Historic Truss Rod Assembly (No Tubing)
- Joint Angle: 4 degrees (+/- 15 seconds)
Neck Fit:
- Joint: Mortise and Tenon
- Adhesive: Hot Hide Glue
- Joint Angle Tolerance: +/- .005 inches
- Fingerboard
- Species: One-piece Rosewood
- Radius: 12 inches
- Scale Length: 24.75 inches
- Binding: Single-ply Cream
- Inlays: Cellulose Trapezoid
- Nut/E.O.B: 1.687/2.062
Nut:
- Material: Nylon
- Width: 1.687
- Slots: Gibson PLEK System
Headstock:
- Inlay: Holly Headstock Veneer w/ Pearl logo
- Truss Rod Cover: Vintage Black and White
- Angle: 17 Degrees
Tuners:
- Model: Sperzel USA made
- Tuning Ratio: 12:01
- Plating: Nickel
Bridge:
- Type: ABR-1 bridge
- Plating: Nickel
Tailpiece:
- Type: Lightweight Aluminum Stopbar Tailpiece
- Plating: Nickel
Hardware:
- Knobs: Gold Top Hats with Silver Inserts and Dial Pointers
- Toggle Switch Washer: Cream with Gold Silkscreen
- Pickguard: Cream
- Pickup Mounting Rings: Cream
- Control Plate Cover: Black
- Strap Buttons: Aluminum
Pickups:
- Neck Position: Custom Bucker
- Bridge Position: Custom Bucker
Electronics:
- Potentiometers: 2 Volume Controls, 2 Tone Controls
- Capacitors: Bumblebee
- Toggle Switch: Three-Way with Amber Toggle Cap
- Output Jack: Traditional 1/4 inch
Finish:
- Sealer: Nitrocellulose Lacquer
- Treatment: Aniline Dye
- Case: Custom Shop Hardshell
Accessories:
- Certificate of Authenticity: COA
- Additional Materials: Each 1960 Les Paul Standard Reissue comes with adjustment literature, and documentation for the guitar's limited lifetime warranty
- Top: Carved Maple AAA top
- Back: Solid, Non-Weight Relieved Mahogany Back
- Binding: Single-ply Cream Binding on Top
Neck:
- Species: 1-piece Mahogany Neck with Long Neck Tenon
- Profile: 1960 Slim taper
- Truss Rod: Historic Truss Rod Assembly (No Tubing)
- Joint Angle: 4 degrees (+/- 15 seconds)
Neck Fit:
- Joint: Mortise and Tenon
- Adhesive: Hot Hide Glue
- Joint Angle Tolerance: +/- .005 inches
- Fingerboard
- Species: One-piece Rosewood
- Radius: 12 inches
- Scale Length: 24.75 inches
- Binding: Single-ply Cream
- Inlays: Cellulose Trapezoid
- Nut/E.O.B: 1.687/2.062
Nut:
- Material: Nylon
- Width: 1.687
- Slots: Gibson PLEK System
Headstock:
- Inlay: Holly Headstock Veneer w/ Pearl logo
- Truss Rod Cover: Vintage Black and White
- Angle: 17 Degrees
Tuners:
- Model: Sperzel USA made
- Tuning Ratio: 12:01
- Plating: Nickel
Bridge:
- Type: ABR-1 bridge
- Plating: Nickel
Tailpiece:
- Type: Lightweight Aluminum Stopbar Tailpiece
- Plating: Nickel
Hardware:
- Knobs: Gold Top Hats with Silver Inserts and Dial Pointers
- Toggle Switch Washer: Cream with Gold Silkscreen
- Pickguard: Cream
- Pickup Mounting Rings: Cream
- Control Plate Cover: Black
- Strap Buttons: Aluminum
Pickups:
- Neck Position: Custom Bucker
- Bridge Position: Custom Bucker
Electronics:
- Potentiometers: 2 Volume Controls, 2 Tone Controls
- Capacitors: Bumblebee
- Toggle Switch: Three-Way with Amber Toggle Cap
- Output Jack: Traditional 1/4 inch
Finish:
- Sealer: Nitrocellulose Lacquer
- Treatment: Aniline Dye
- Case: Custom Shop Hardshell
Accessories:
- Certificate of Authenticity: COA
- Additional Materials: Each 1960 Les Paul Standard Reissue comes with adjustment literature, and documentation for the guitar's limited lifetime warranty
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.