The Goodwood Audio RCV is a passive box, designed to be paired with the LongLine active junction box and DI. RCV can receive balanced signals from LongLine via its XLR jacks. It can receive a stereo XLR signal from LongLine and convert it to unbalanced 1/4" outputs to feed up to two guitar amps. It is designed to work with a stereo/dual mono signal (sending to two amps) or a mono signal (sending to one amp) and is completely passive (no power required for RCV).

Run a short cable from RCV to your amp inputs.

RCV is designed to work in three configurations -- all receiving signal from LongLine's XLR outputs.
1. Stereo XLR inputs, sending to two amps.
2. Dual mono signal to two amps. LongLine would be using its summing or splitting options for this and send signal to two amps via RCV.
3. A Mono signal: Taking one XLR output from LongLine, you would now plug into RCV's left XLR input and send its left 1/4" output to your amp input.

RCV Inputs and Outputs:
- Female XLR inputs: These XLR inputs are fed via XLR by the LongLine XLR outputs. On RCV, the Left female XLR input connects to the Left 1/4" output after being converted from balanced XLR to unbalanced 1/4". The same goes for the Right female XLR to right unbalanced 1/4" onboard RCV. If using mono, use the left input and output on RCV.

- Left and Right 1/4" unbalanced TS outputs: Plug these into your amp(s). If using in mono, plug in and out of the left input and output. Use a standard unbalanced guitar instrument lead or… read more patch cable to connect to your amp. Best practice would suggest keeping this cable as short as possible, 5 feet being ideal.

Features:

- Use with LongLine only
- RCV is completely passive (no power required)
- Receives stereo or mono XLR signal from LongLine
- Converts signal to unbalanced 1/4" output
- Two XLR Inputs, two 1/4" Outputs

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

read less