Fender FR-12 Tone Master Powered Speaker
![Fender FR-12 Tone Master Powered Speaker, New, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/FEN_2275200_000_Front_875494-653b6a9ef55d7d7cb124faba305a7f09.jpg)
![Fender FR-12 Tone Master Powered Speaker, New, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/FEN_2275200_000_Angled_875494-4e9018b98c77bffd1aadba3fdde28282.jpg)
![Fender FR-12 Tone Master Powered Speaker, New, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/FEN_2275200_000_Back_875494-a9d329170eabc01b34baaf2f5f113791.jpg)
![Fender FR-12 Tone Master Powered Speaker, New, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/FEN_2275200_000_Top_875494-4130d94e3d7ad60d8c70f905f68d3986.jpg)
![Fender FR-12 Tone Master Powered Speaker, New, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/FEN_2275200_000_Stand_875494-3ec3a2472fef658d8c207314f16c52f8.jpg)
With tilt-back legs, a 3-band EQ, and a high frequency cut control, the Fender FR-12 cabinet will give you some stage volume with your Tone Master Pro.
Overview
The Fender Tone Master FR-12 is a full range, flat response powered speaker designed for use with today's digital guitar amp modelers and profilers. Tone Master FR-12 delivers clear and accurate sound reproduction and perfectly replicates every detail of the amp and effect models. They're the ultimate companion to Tone Master Pro and the ideal solution for players who use modelers at home or on stage.
The Tone Master FR-12 features an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. The 3-band active EQ and high frequency cut control allow players to fine tune their stage tone without altering the line output signal. Plus, the design of the FR series was inspired by classic Fender amplifiers for an authentic backline look and feel.
- 12" Special Design Speaker
- 1" Wide Dispersion High Frequency Driver
- 3-Band Active EQ with High Frequency Cut Control
- Integrated Tilt Back Legs
- Lightweight Plywood Enclosure
- Authentic Fender Amplifier Industrial Design
The Tone Master FR-12 features an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. The 3-band active EQ and high frequency cut control allow players to fine tune their stage tone without altering the line output signal. Plus, the design of the FR series was inspired by classic Fender amplifiers for an authentic backline look and feel.
Features:
- 1,000 Watt Class-D Power Amp- 12" Special Design Speaker
- 1" Wide Dispersion High Frequency Driver
- 3-Band Active EQ with High Frequency Cut Control
- Integrated Tilt Back Legs
- Lightweight Plywood Enclosure
- Authentic Fender Amplifier Industrial Design
Specs
-Series: Tone Master
-Model Name: Tone Master FR-12
-Speaker Type: Active 2-Way
-Voltage: 120V
-Inputs: One (1) Balanced 1/4" - XLR Combination
-Channels: One
-Controls: Volume, Treble, Middle, Bass, Cut
-Line Out: One - XLR with Ground Lift
-Output Power: 1,000 Watts
-Maximum Output Level: 130 dB
-Frequency Range: 58 Hz - 20 kHz (-10 dB)
-Frequency Response: 70Hz - 20kHz (-3dB)
-LF Transducers: 12" Special Design
-HF Transducers: 1" Compression
-Cabinet Material: Lightweight Plywood
-Color: Black
-Grille Cloth: Silver-Strand
-Handle: Molded Plastic Strap with Nickel-Plated Caps
-Voltage Requirements: 100-240 VAC, 50-60 Hz
-Dimensions: 18.13" (46.05 cm) H x 23.5" (59.7 cm) W x 9.88" (25.1 cm) D
-Weight:27.6 lbs. (11.6 kg)
-Model Name: Tone Master FR-12
-Speaker Type: Active 2-Way
-Voltage: 120V
-Inputs: One (1) Balanced 1/4" - XLR Combination
-Channels: One
-Controls: Volume, Treble, Middle, Bass, Cut
-Line Out: One - XLR with Ground Lift
-Output Power: 1,000 Watts
-Maximum Output Level: 130 dB
-Frequency Range: 58 Hz - 20 kHz (-10 dB)
-Frequency Response: 70Hz - 20kHz (-3dB)
-LF Transducers: 12" Special Design
-HF Transducers: 1" Compression
-Cabinet Material: Lightweight Plywood
-Color: Black
-Grille Cloth: Silver-Strand
-Handle: Molded Plastic Strap with Nickel-Plated Caps
-Voltage Requirements: 100-240 VAC, 50-60 Hz
-Dimensions: 18.13" (46.05 cm) H x 23.5" (59.7 cm) W x 9.88" (25.1 cm) D
-Weight:27.6 lbs. (11.6 kg)
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 35.95 lbs
- Shipping Dimensions: 27 x 22 x 15 in
- Manufacturer Part Number (MPN): 2275200000
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(1 ratings)
Submitted November 6, 2023 by Allan B in Tempe, AZ
"Really great sounding cab, and a great value!"
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
I normally would not bother with a review of a speaker cab, but the new Fender Tone Master FR and the TM Pro modeling units have been really hyped and I’m sure a lot of people are interested.I’ve had a love/hate relationship with modeling for the lasts 6 or 7 years. Going direct has never really been an option with the band I play in so an FR has always had to be my backline and main amplification. I would get really frustrated that I had all these great tones on my modeling unit but they never came across like I wanted with an FR. I have had Friedman ASM, Laney FR112, Headrush, Powercab+ and 212+. Some were better than others but I’d eventually get tired of fighting and go back to an amp and pedalboard. I know some of that was my own fault but frustrating all the same. I recently started using the Friedman IR-X tube preamp and had been going into the FX return of a solid state amp. It sounded ok but not great. When Fender released the FR10 and FR12 I was surprised by the price honestly, so I figured I would take a chance and see how they did. So far I have been really happy with the results. An FR will NEVER sound exactly like an amp in the room, but the FR12 does a great job of taming the highs and lows and eliminating a lot of the HiFi elements a lot of FR’s struggle with. It’s lightweight and loud and IMHO the best FRFR I’ve used so far. I’ve also been experimenting with it and Helix Native and really enjoying what I’m getting out of that as well. I like it…
read more
so much I may go back to digital modeling full time. It’s really hard to beat the convenience and portability of digital. I would recommend this to anyone looking for an amplification solution for their modeler or ampless pedalboard.
Sound
It will never be 100% amp in the room, but the FR12 does a great job of naturally reproducing your IR’s and cab models. It is not a magic bullet, it can boom and fizz like any FRFR and it still takes some EQ tweaking and adjustments but the results I have been able to achieve make me happy. The FR12 is more than loud enough to hold its own in a band setting and has really great dispersion.
Features
Onboard EQ and high cut are excellent. Great for final EQ for the venue or on the fly tweaking without having to mess with your presets or pedalboard. The tilt back legs are pretty awesome too. While not really a feature, the looks are also great. At a distance it could easily be mistaken for a Hot Rod.
Ease of Use
You get out what you put in :) If you do the work up front you will be happy with the results. I love the onboard EQ for quick tone tailoring. Overall very happy.
Quality
I’ve had it a couple of weeks and did an outdoor gig with it and it held up just fine with the volume blasting at 10 (it goes to 12!). The build quality is as good as any other Fender import amp. Solid construction, nice Tolex job, sturdy knobs and switches. ** There have been several reports of an annoying hiss with the FR10 and FR12, but I have not noticed it on my unit.
Value
Uh, heck yeah it’s worth it! Fender really hit it out of the park with these speakers and the price is very very reasonable when compared to Laney or Friedman.
Manufacturer Support
I’ve owned many Fender products and dealt with them a few times over the years. I’ve got no complaints. They shut down the official Fender forums a few years ago but have been very active on The Gear Page forums to support the Tone Master Pro release.
The Wow Factor
I think this will appeal to anyone interested in, or currently using digital modeling. It sounds great, looks like a real amp, and is very light. Pretty much everything a speaker for a modeling unit should be!
Musical Background:
Playing for almost 50 years now and still kicking in local bands :)
Musical Style:
Rock, Pop, Prog, CCM read less
Sound
It will never be 100% amp in the room, but the FR12 does a great job of naturally reproducing your IR’s and cab models. It is not a magic bullet, it can boom and fizz like any FRFR and it still takes some EQ tweaking and adjustments but the results I have been able to achieve make me happy. The FR12 is more than loud enough to hold its own in a band setting and has really great dispersion.
Features
Onboard EQ and high cut are excellent. Great for final EQ for the venue or on the fly tweaking without having to mess with your presets or pedalboard. The tilt back legs are pretty awesome too. While not really a feature, the looks are also great. At a distance it could easily be mistaken for a Hot Rod.
Ease of Use
You get out what you put in :) If you do the work up front you will be happy with the results. I love the onboard EQ for quick tone tailoring. Overall very happy.
Quality
I’ve had it a couple of weeks and did an outdoor gig with it and it held up just fine with the volume blasting at 10 (it goes to 12!). The build quality is as good as any other Fender import amp. Solid construction, nice Tolex job, sturdy knobs and switches. ** There have been several reports of an annoying hiss with the FR10 and FR12, but I have not noticed it on my unit.
Value
Uh, heck yeah it’s worth it! Fender really hit it out of the park with these speakers and the price is very very reasonable when compared to Laney or Friedman.
Manufacturer Support
I’ve owned many Fender products and dealt with them a few times over the years. I’ve got no complaints. They shut down the official Fender forums a few years ago but have been very active on The Gear Page forums to support the Tone Master Pro release.
The Wow Factor
I think this will appeal to anyone interested in, or currently using digital modeling. It sounds great, looks like a real amp, and is very light. Pretty much everything a speaker for a modeling unit should be!
Musical Background:
Playing for almost 50 years now and still kicking in local bands :)
Musical Style:
Rock, Pop, Prog, CCM read less
30 of 30 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
New
$599.99
- 12 x$50.00
- 8 x$75.00
Limited Time Only: 10% OFF!
- Add this item to your cart to unlock 10% OFF! For a limited time, save an extra 10% on select Fender, Squier, EVH, Gretsch, Jackson, and Charvel gear.
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.