Fuchs Plush REP-3 Tube-Voiced Delay Pedal
No longer available at zZounds
zZounds Gear Experts Say...
By using unique solid-state audio circuits and internally converted power supply topology, the REP-3 accurately delivers warm, tape-like delay with low noise.
Overview
Like the Replay and Replay Jr, the Fuchs REP-3 delivers tape-like goodness and has the same attention to the audio and delay circuits as the Replay, and Replay Jr, but with a unique solid state audio stage.
The REP-3 features up to one second of pure warm musical delay. Using a unique solid state audio circuit topology, the REP-3 still retains the warm musical tones of an analogue tape delay. By using a unique power supply topology, the incoming 9 volts is internally converted to plus and minus 9V for maximum dynamic range, lowest noise, and musicality. The REP-3 also features the same proprietary great-sounding digital technology used in many of our pedals, for the delay line. The enclosure is cast aluminum, and precision machined. It features ultra-bright LEDS for highest visibility on stage or even outdoors. The control panel features: LEDS for: Echo mute and tempo indication. The REP-3 operates just as simply as a tape delay: No fancy programming, or software silliness. Designed by musicians for musicians.
The control panel is clear, concise, and user-friendly. Controls are delay time, mix, wow and flutter, repeats and fidelity. The fidelity control allows you to tailor the repeats from digitally clear to tape smoothness. An internal switch allows you to set the output to wet (delay only) for use through a parallel effects loop, or for stereo ping-pong operation. While the REP-3 may be used on a pedal board in-front of an amplifier, for best performance, we encourage its… read more use in an effects loop. The REP-3 is simple to operate its unique retro styling is equally at-home in a studio, as it is on a stage.
- Cast aluminum housings
- Industrial powder coat finish
- Heat cured silk screen labeling
- True bypass
- Cliff switch
- Neutrik connectors
- Metal shaft controls
- Premium boutique quality passive components selected for tone
- Mil spec fiberglass two sided circuit board construction for consistent long term performance
- Made in the USA read less
The REP-3 features up to one second of pure warm musical delay. Using a unique solid state audio circuit topology, the REP-3 still retains the warm musical tones of an analogue tape delay. By using a unique power supply topology, the incoming 9 volts is internally converted to plus and minus 9V for maximum dynamic range, lowest noise, and musicality. The REP-3 also features the same proprietary great-sounding digital technology used in many of our pedals, for the delay line. The enclosure is cast aluminum, and precision machined. It features ultra-bright LEDS for highest visibility on stage or even outdoors. The control panel features: LEDS for: Echo mute and tempo indication. The REP-3 operates just as simply as a tape delay: No fancy programming, or software silliness. Designed by musicians for musicians.
The control panel is clear, concise, and user-friendly. Controls are delay time, mix, wow and flutter, repeats and fidelity. The fidelity control allows you to tailor the repeats from digitally clear to tape smoothness. An internal switch allows you to set the output to wet (delay only) for use through a parallel effects loop, or for stereo ping-pong operation. While the REP-3 may be used on a pedal board in-front of an amplifier, for best performance, we encourage its… read more use in an effects loop. The REP-3 is simple to operate its unique retro styling is equally at-home in a studio, as it is on a stage.
Features:
- Premium Neutrik jacks- Cast aluminum housings
- Industrial powder coat finish
- Heat cured silk screen labeling
- True bypass
- Cliff switch
- Neutrik connectors
- Metal shaft controls
- Premium boutique quality passive components selected for tone
- Mil spec fiberglass two sided circuit board construction for consistent long term performance
- Made in the USA read less
Specs
- Dimensions: 4 x 7"
- Weight: 1.5 lbs.
- Cabinet Material: Solid Cast Aluminum
- Covering: Industrial Grade powder coating. Heat cured silk screening.
- Circuitry: Bi-Fet Op amp, powered by dual polar supply, Tube voiced delay voicing. POWER: 9 VDC (ONLY) from external adaptor, or battery.
- Input impedance: 1-M Mix Output impedance approximately 10-K. Delay: 32-Khz Clock 15-K Bandwidth with up to 1-Second of delay time.
- Power: 60 ma from external power supply, via industry standard 2.1 MM tip negative connector. Internal switching power supply produces bipolar supply for the audio stage.
- Input: 1-Meg impedance signals from 500mv to 1-Volt level.
- Mix output: 10-K output impedance 1.5-volt level max.
- VU Meter: A-weighted 0-db indicates maximum signal to delay line before overload, works in conjunction with LED Peak indicator.
- Digital delay technology: 32-Khz clock speed, 16 Khz bandwidth. 20-ms to 1-second delay range. Passive wet/dry mixing for maximum sonic quality.
- Weight: 1.5 lbs.
- Cabinet Material: Solid Cast Aluminum
- Covering: Industrial Grade powder coating. Heat cured silk screening.
- Circuitry: Bi-Fet Op amp, powered by dual polar supply, Tube voiced delay voicing. POWER: 9 VDC (ONLY) from external adaptor, or battery.
- Input impedance: 1-M Mix Output impedance approximately 10-K. Delay: 32-Khz Clock 15-K Bandwidth with up to 1-Second of delay time.
- Power: 60 ma from external power supply, via industry standard 2.1 MM tip negative connector. Internal switching power supply produces bipolar supply for the audio stage.
- Input: 1-Meg impedance signals from 500mv to 1-Volt level.
- Mix output: 10-K output impedance 1.5-volt level max.
- VU Meter: A-weighted 0-db indicates maximum signal to delay line before overload, works in conjunction with LED Peak indicator.
- Digital delay technology: 32-Khz clock speed, 16 Khz bandwidth. 20-ms to 1-second delay range. Passive wet/dry mixing for maximum sonic quality.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 973-772-4420
Email: info@fuchsaudio.com
Web: https://fuchsaudiotechnology.com/contact-us/
Phone: 973-772-4420
Email: info@fuchsaudio.com
Web: https://fuchsaudiotechnology.com/contact-us/
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
Gibson Exclusive SG Standard Electric Guitar (with Soft Case)
$1,799.00
- 18 x
- 12 x$149.92
- 8 x$224.88
Gibson SG Standard Custom Color Electric Guitar (with Soft Case)
$1,499.00
- 18 x
- 12 x$124.92
- 8 x$187.38
Gibson Exclusive SG Standard '61 Electric Guitar (with Case)
$1,999.00
- 18 x
- 12 x$166.58
- 8 x$249.88
Gibson Les Paul Standard '50s AAA Top Electric Guitar (with Case)
$2,999.00
- 18 x
- 12 x$249.92
- 8 x$374.88
Gibson Exclusive Les Paul Standard '60s AAA Top Electric Guitar (with Case)
$2,999.00
- 18 x
- 12 x$249.92
- 8 x$374.88
