Dunlop Jerry Cantrell Firefly Cry Baby Wah Pedal

No longer available at zZounds
A custom-voiced Cry Baby with the Cantrell stamp of approval on it, Dunlop's Jerry Cantrell Firefly Cry Baby Wah boasts a tight and punchy wah effect.

This special edition of the Jerry Cantrell Cry Baby Wah is inspired by the influential and prolific frontman's latest solo record, Brighten. Glow-in-the-dark features on the tread, front badge, and bottom plate stand out and shine in contrast with the casting's subdued raw iron finish--an embodiment of the album's exploration of darkness and light.

Sonically, this Cry Baby Wah is custom-voiced for a tight, punchy heel-down tone with rugged side-control knob for fine-tuning the toe-down frequency--perfect for nailing Jerry's powerful wah-laden licks."

- Power:
The Jerry Cantrell Cry Baby Wah is powered by one 9-volt battery (remove bottom plate to install), the Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies.

- Operation:
- 1. Run an instrument cable from your guitar to the JC95B's INSTRUMENT jack and another instrument cable from the JC95B's AMPLIFIER jack into your amplifier's input.
- 2. Push the toe of the pedal down until you feel a "click" to turn the pedal on/off.
- 3. Rotate the FINE TUNE knob clockwise for a brighter toe-down response or counterclockwise for a darker toe-down response.
- 4. Rock your foot back and forth on the pedal to hear the vocal, expressive tones that the Cry Baby Wah is famous for.

Features:

- Special edition makeover inspired by Jerry Cantrell's solo record, Brighten
- Glow-in-the-dark elements stand out and shine in contrast with raw iron finish
- Custom-voiced for a tight, punchy heel-down read more tone
- Rugged side-control knob for fine-tuning the toe-down frequency
- Perfect for nailing Jerry's famous wah tone
read less

- Impedance:
- Input Impedance: 1MO
- Output Impedance: 10MO
- Filter Center Frequency:
- Heel Down: 320 Hz to 390 Hz
- Toe Down Fine Tune Max: 1700 Hz to 2070 Hz
- Toe Down Fine Tune Min: 1050 kHz to 1270 Hz
- Maximum Level:
- Input: -11.5 dBV
- Output: +6 dBV
- Maximum Gain At Center Frequency:
- Heel Down: +18 dBV
- Toe Down: +20 dBV
- Noise Floor:
- Heel Down: >97 dB
- Toe Down: >89 dB
- Bypass - Hardwire:
- Current Draw: 1 mA
- Power Supply: DC 9 volts

For support or warranty questions, please contact the manufacturer:
Phone: 707-745-2722

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer