DiMarzio Jumper Cable
No longer available at zZounds
Designed with right angle plugs for ease of use, the DiMarzio Jumper Cable provides you with extreme durability and minimal high-frequency loss.
Overview
Recognizing the need for a short "jumper" version of DiMarzio's famous guitar cables, DiMarzio now offers professional-grade cables in 6 and 12-inch lengths. DiMarzio uses the same U.S.-made nylon overbraid cable as in DiMarzio's standard guitar cables, delivering maximum signal transmission and minimum high-frequency loss. Right-angle Switchcraft ends are encapsulated in a super-tough thermoplastic resin that permanently bonds the plug to the cable, making the jumpers so rugged and durable that they carry a lifetime warranty.
Specs
Wire gauge (AWG): 20 (0.519 mm2)
Diameter: 0.237 in. (6.02mm)
Insulation: polyethylene intter with PVC outer
Capacitance pF/ft.: 19 pF/ft. (62 pF/M) cond/cond 35 pF/ft (115 pF/M) cond/shield
Shield & material: copper braid + conductive PVC 98%
Jacket & material: PVC + nylon overbraid
Resistance ohms/1,000 ft.: 5.5 ohms/1,000 ft. (18 ohms/km)
Inductance uH: 0.07 uh/ft. (0.2 uh/M)
Termination method: silver solder
Diameter: 0.237 in. (6.02mm)
Insulation: polyethylene intter with PVC outer
Capacitance pF/ft.: 19 pF/ft. (62 pF/M) cond/cond 35 pF/ft (115 pF/M) cond/shield
Shield & material: copper braid + conductive PVC 98%
Jacket & material: PVC + nylon overbraid
Resistance ohms/1,000 ft.: 5.5 ohms/1,000 ft. (18 ohms/km)
Inductance uH: 0.07 uh/ft. (0.2 uh/M)
Termination method: silver solder
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.