Blackstar HT-20RH MK3 Guitar Amplifier Head (20 Watts)
![Blackstar HT-20RH MK3 Guitar Amplifier Head (20 Watts), Warehouse Resealed, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/BLC_HT20RHMK3_Front_884132-138307587260ad703c18bc9540cf8b21.jpg)
![Blackstar HT-20RH MK3 Guitar Amplifier Head (20 Watts), Warehouse Resealed, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/BLC_HT20RHMK3_Back_884132-53d19d15e99b98c34b5c2eb40877bbc3.jpg)
![Blackstar HT-20RH MK3 Guitar Amplifier Head (20 Watts), Warehouse Resealed, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/BLC_HT20RHMK3_Top_884132-51e44e5dbdc133814c07b04730419321.jpg)
![Blackstar HT-20RH MK3 Guitar Amplifier Head (20 Watts), Warehouse Resealed, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/BLC_HT20RHMK3_Right_884132-dac18fd4443e741ff46faf35715f974f.jpg)
![Blackstar HT-20RH MK3 Guitar Amplifier Head (20 Watts), Warehouse Resealed, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/BLC_HT20RHMK3_Left_884132-40b74c94de7ef0f41cbe697961ba6069.jpg)
With two EL84 power tubes, CabRig DSP, and a USB-C output for recording, the HT-20RH MK3 brilliantly combines classic tube tones with modern amp features.
Overview
The HT MK3 range is one of Blackstar's cornerstone valve amp series, featuring powerful tube amp sounds and modern features in an affordable, low-wattage combo or head format. After tireless refinement, research, and design, these amplifiers offer a premium amplifier experience for players of all experiences, great for quiet practice and home recording, or for taking to small gigs.
- EL84 Power Stage
- Power reduction down to 1/10 for reliable quiet practice
- CabRig DSP cabinet simulation output over 1/4", XLR, or USB-C
- USB-C audio interface capabilities
- Line in for jamming along or listening to music
- Patented ISF tone control for dialing in classic American and British amp tones
- Channel and Voice footswitchable via optional FS-22 or FS-16 (included with HT20)
- Newly voiced studio quality reverb
EL84 Power Stage
EL84s are at the tonal heart of the HT-20R MK III combo and head. Blackstar has used decades of valve amp design experience to combine the response and character of this classic British valve with a carefully voiced preamp to create wonderfully lush valve tones. From pure boutique cleans, to mild overdrive that cleans up by backing off the guitar volume control, right up to saturated distortion, this amp does it all.
From chiming 'boutique' cleans, to on the edge crunch, or full-on distortion, HT-20 MK III deliver 'the sound in your head'
Concentrated, to… read more Concert-rated
The HT-20R MK III comes equipped with a power reduction feature taking you down to 2W without any tonal compromise, perfect for driving those EL84's hard at manageable volumes in the studio or home.
When you're ready to take to the stage, switch to full 20W and utilize the XLR DI output to simultaneously feed direct to the sound engineer with incredible sounding cabinet simulation via Blackstar's CabRig IR-based speaker simulator software.
Perfect for Playing & Recording
Alongside providing capture-ready valve tones at any volume, the HT-20R MK III comes equipped with a direct USB-C output which can send 2 channels (left and right) to your DAW, ensuring the easiest way to capture authentic valve tone in recordings without the need for an interface.
The best part? These amps have in-built load protection, meaning you can use them without a cabinet connected for silent practice and recording.
IR-based CabRig speaker simulator
CabRig, Blackstar's class-leading IR-based speaker simulator comes as standard in the HT-20R MK III, offering hundreds of different cabinet, mic, and room combinations. Save your favorites to three presets for easy access directly from the amplifier. Get premium valve tones into your headphones, monitors and mixes.
-Preamp Valves: 2x ECC83
-Power Amp Valves: 2x EL84
-Channels: 2 with Footswitchable Voices for Clean and Overdrive
-Power Reduction: Down to 2 Watts
-Inputs:
- 1/4" Guitar In
- Aux cable Line In
-Outputs:
- 1/4" Speaker Out (2x16 Ohm/1x8 Ohm or 1x16 Ohm)
- 1/4" Line Out/Headphone Jack
- USB-C audio out
- XLR D.I. Out
- Effects Loop
-Cabinet Simulator: CabRig IR-based DSP
-Onboard FX: Studio quality reverb
-Dimensions: 473 x 244 x 222 (mm)
-Weight: 9.6kg
read less
Features:
- Rich and responsive Clean and Overdrive channels, each with voice switches- EL84 Power Stage
- Power reduction down to 1/10 for reliable quiet practice
- CabRig DSP cabinet simulation output over 1/4", XLR, or USB-C
- USB-C audio interface capabilities
- Line in for jamming along or listening to music
- Patented ISF tone control for dialing in classic American and British amp tones
- Channel and Voice footswitchable via optional FS-22 or FS-16 (included with HT20)
- Newly voiced studio quality reverb
EL84 Power Stage
EL84s are at the tonal heart of the HT-20R MK III combo and head. Blackstar has used decades of valve amp design experience to combine the response and character of this classic British valve with a carefully voiced preamp to create wonderfully lush valve tones. From pure boutique cleans, to mild overdrive that cleans up by backing off the guitar volume control, right up to saturated distortion, this amp does it all.
From chiming 'boutique' cleans, to on the edge crunch, or full-on distortion, HT-20 MK III deliver 'the sound in your head'
Concentrated, to… read more Concert-rated
The HT-20R MK III comes equipped with a power reduction feature taking you down to 2W without any tonal compromise, perfect for driving those EL84's hard at manageable volumes in the studio or home.
When you're ready to take to the stage, switch to full 20W and utilize the XLR DI output to simultaneously feed direct to the sound engineer with incredible sounding cabinet simulation via Blackstar's CabRig IR-based speaker simulator software.
Perfect for Playing & Recording
Alongside providing capture-ready valve tones at any volume, the HT-20R MK III comes equipped with a direct USB-C output which can send 2 channels (left and right) to your DAW, ensuring the easiest way to capture authentic valve tone in recordings without the need for an interface.
The best part? These amps have in-built load protection, meaning you can use them without a cabinet connected for silent practice and recording.
IR-based CabRig speaker simulator
CabRig, Blackstar's class-leading IR-based speaker simulator comes as standard in the HT-20R MK III, offering hundreds of different cabinet, mic, and room combinations. Save your favorites to three presets for easy access directly from the amplifier. Get premium valve tones into your headphones, monitors and mixes.
Specifications
-Watts: 20-Watt head-Preamp Valves: 2x ECC83
-Power Amp Valves: 2x EL84
-Channels: 2 with Footswitchable Voices for Clean and Overdrive
-Power Reduction: Down to 2 Watts
-Inputs:
- 1/4" Guitar In
- Aux cable Line In
-Outputs:
- 1/4" Speaker Out (2x16 Ohm/1x8 Ohm or 1x16 Ohm)
- 1/4" Line Out/Headphone Jack
- USB-C audio out
- XLR D.I. Out
- Effects Loop
-Cabinet Simulator: CabRig IR-based DSP
-Onboard FX: Studio quality reverb
-Dimensions: 473 x 244 x 222 (mm)
-Weight: 9.6kg
Specs
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 26.65 lbs
- Shipping Dimensions: 26 x 14 x 12 in
- Manufacturer Part Number (MPN): HT20RHMK3
- Warehouse Resealed
- Shipping Weight: 26.65 lbs
- Shipping Dimensions: 26 x 14 x 12 in
- Manufacturer Part Number (MPN): HT20RHMK3
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 631-390-8737
Email: enquiries@blackstaramps.com
Web: https://blackstaramps.com/support/
Phone: 631-390-8737
Email: enquiries@blackstaramps.com
Web: https://blackstaramps.com/support/
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.