RF Venue DFin Diversity Fin Antenna for Wireless Systems
![RF Venue DFin Diversity Fin Antenna for Wireless Systems, Black, with Padded Cover and Threaded Stand Mount, Main](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/DFIN_829120-e9b8f05909cf6274efc2418e7c4e0e79.jpg)
![RF Venue DFin Diversity Fin Antenna for Wireless Systems, Black, with Padded Cover and Threaded Stand Mount, Setup Diagram](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/wireless_diagram_DFIN_829120-342ae722cbe1ddbcb0e81169ca34a933.jpg)
![RF Venue DFin Diversity Fin Antenna for Wireless Systems, Black, with Padded Cover and Threaded Stand Mount, Dipole](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/dipole_dfin_829120-6881d73008e0ebf886f0901495cdf184.jpg)
![RF Venue DFin Diversity Fin Antenna for Wireless Systems, Black, with Padded Cover and Threaded Stand Mount, LPDA](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/LPDA_Dfin_829120-6b6fe0ee2b41188e747dfec18d8a20e6.jpg)
Improve signal clarity and reduce dropouts on your wireless mics! Just connect the RF Venue DFin to the BNC antenna ports on any brand wireless receiver.
Overview
The patented Diversity Fin antenna is the flagship RF Venue product. It's portable, simple to operate, compatible with any brand, and pushes diversity microphone systems to perform their best in the toughest RF environments. To use, just connect both the A and B ports on any antenna distributor or wireless microphone receiver and point toward the stage. The result is an antenna that dramatically improves system performance in the space of only one antenna. And since only one unit is needed for diversity reception -- not two -- you'll get optimum diversity coverage for much less.
For permanent installations, choose a DFin antenna with L-bracket wall-mount kit. For mobile setups, choose a DFin with threaded stand… read more mount block.
read less
Improve reception anywhere
The Diversity Fin reduces signal dropouts in venues large and small. Integrators love it because it saves money on installs, blends in with its environment, and never has to be reconfigured. Live sound pros love it because it sets up and breaks down in seconds. Film and broadcast pros love it because it fits on bags or carts for shoots anywhere in the world.An advanced antenna tuned for wireless audio
By co-locating two types of antennas at 90 degrees, the Diversity Fin captures vertically and horizontally polarized waves-rather than waves from two different locations. The probability of dropouts is significantly reduced, switching noise disappears, and the likelihood of cross-linear signal fades is reduced to practically zero.For permanent installations, choose a DFin antenna with L-bracket wall-mount kit. For mobile setups, choose a DFin with threaded stand… read more mount block.
Specs
Operating frequency: 470-698 MHz
Average return loss: -9.4 dBm
Impedance: 50 Ohm
Mount: Wallmount flange
Operating temperature: -23 degrees C-54 degrees C
Connector(s): (2) BNC female
LPDA:
- Beam width: 140 degrees azimuth
- F/B ratio: -8 dBm
- F/S ratio: -5 dBm
- Gain: 5 dBd
DIPOLE:
- Beam width: 100 degrees azimuth
- F/B ratio: -5 dBm
- F/S ratio: -13 dBm
- Gain: 1.8 dBd
NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
Average return loss: -9.4 dBm
Impedance: 50 Ohm
Mount: Wallmount flange
Operating temperature: -23 degrees C-54 degrees C
Connector(s): (2) BNC female
LPDA:
- Beam width: 140 degrees azimuth
- F/B ratio: -8 dBm
- F/S ratio: -5 dBm
- Gain: 5 dBd
DIPOLE:
- Beam width: 100 degrees azimuth
- F/B ratio: -5 dBm
- F/S ratio: -13 dBm
- Gain: 1.8 dBd
- Dimensions and Weight in Packaging
- Black, with Padded Cover and Threaded Stand Mount
- Shipping Weight: 1.44 lbs
- Shipping Dimensions: 15 x 12 x 2 in
- Manufacturer Part Number (MPN): RFVDFIN
- Black, with Wall Mount
- Shipping Weight: 1.25 lbs
- Shipping Dimensions: 15 x 11 x 2 in
- Manufacturer Part Number (MPN): RFVDFINB
- Warehouse Resealed, Black, with Wall Mount
- Shipping Weight: 1.25 lbs
- Shipping Dimensions: 15 x 11 x 2 in
- Manufacturer Part Number (MPN): RFVDFINB
- White, with Wall Mount
- Shipping Weight: 1.5 lbs
- Shipping Dimensions: 14 x 11 x 2 in
- Manufacturer Part Number (MPN): RFVDFINW
Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophonesNOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Web: https://www.audio-technica.com/en-us/support/category/product-support/
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Web: https://www.audio-technica.com/en-us/support/category/product-support/
Black, with Padded Cover and Threaded Stand Mount
$649.00
- 12 x$54.08
- 8 x$81.13
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.