RF Venue DFin Diversity Fin Antenna for Wireless Systems
Improve signal clarity and reduce dropouts on your wireless mics! Just connect the RF Venue DFin to the BNC antenna ports on any brand wireless receiver.
$649.00
- 12 x$54.08
- 8 x$81.13
- No Credit Check6 x$108.17
- No Credit Check4 x$162.25
RF Venue DFin Diversity Fin Antenna
No longer available at zZounds
Overview
The patented Diversity Fin antenna is the flagship RF Venue product. It's portable, simple to operate, compatible with any brand, and pushes diversity microphone systems to perform their best in the toughest RF environments. To use, just connect both the A and B ports on any antenna distributor or wireless microphone receiver and point toward the stage. The result is an antenna that dramatically improves system performance in the space of only one antenna. And since only one unit is needed for diversity reception-not two-you'll get optimum diversity coverage for much less.
Improve reception anywhere.
The Diversity Fin reduces signal dropouts in venues large and small. Integrators love it because it saves money on installs, blends in with its environment, and never has to be reconfigured. Live sound pros love it because it sets up and breaks down in seconds. Film and broadcast pros love it because it fits on bags or carts for shoots anywhere in the world.An advanced antenna tuned for wireless audio
By co-locating two types of antennas at 90 degrees, the Diversity Fin captures vertically and horizontally polarized waves-rather than waves from two different locations. The probability of dropouts is significantly reduced, switching noise disappears, and the likelihood of cross-linear signal fades is reduced to practically zero.Specs
Operating frequency: 470-698 MHz
Average return loss: -9.4 dBm
Impedance: 50 Ohm
Mount: Wallmount flange
Operating temperature: -23 degrees C - 54 degrees C
Connector(s): (2) BNC female
LPDA:
- Beam width: 140 degrees azimuth
- F/B ratio: -8 dBm
- F/S ratio: -5 dBm
- Gain: 5 dBd
DIPOLE:
- Beam width: 100 degrees azimuth
- F/B ratio: -5 dBm
- F/S ratio: -13 dBm
- Gain: 1.8 dBd
Average return loss: -9.4 dBm
Impedance: 50 Ohm
Mount: Wallmount flange
Operating temperature: -23 degrees C - 54 degrees C
Connector(s): (2) BNC female
LPDA:
- Beam width: 140 degrees azimuth
- F/B ratio: -8 dBm
- F/S ratio: -5 dBm
- Gain: 5 dBd
DIPOLE:
- Beam width: 100 degrees azimuth
- F/B ratio: -5 dBm
- F/S ratio: -13 dBm
- Gain: 1.8 dBd
No longer available at zZounds
This is a carousel with product cards. Use the previous and next buttons to navigate.