Audio Technica Pro 35AX Microphone

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Audio Technica Pro 35AX Microphone, Main
Audio Technica Pro 35AX Microphone, Mic Without Clip
Audio Technica Pro 35AX Microphone, Main Audio Technica Pro 35AX Microphone, Mic Without Clip
zZounds Gear Experts Say...
Includes Pro 35AX Microphone, AT8418 UniMount instrument mount, AT8536 power module, protective pouch.

Designed for sax, toms, brass and percussion, the PRO 35ax excels in high-SPL applications and is ideal for active stage performances. The UniMount clip permits accurate positioning, provides shock resistance and protects the microphone element. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. The Pro35AX's extended frequency response captures the subtle nuances of the performance. A 6 foot (1.8 m) cable is permanently attached between microphone and power module.

Element: Condenser

Dynamic range (typical): 115 dB, 1 kHz at max. SPL

Polar pattern: cardioid

Frequency response: 50 - 15,000 Hz

Phantom power requirements: 11 -- 52V, 4 mA typical

Switch: flat / roll-off

Open circuit sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa

Low frequency roll-off: 80 Hz, 12 dB per octave

Impedance: 250 ohms

Maximum input sound level: 145 dB SPL, 1 kHz at 1% T.H.D.

Weight: 0.3 oz (8 g)

Power module: in-line

Signal to noise ratio: 64 dB, 1 kHz at 1 Pa

Output connector: XLRM-type (power module)

Accessories furnished: AT8418 UniMount instrument mount; AT8536 power module; protective pouch

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Specification Sheet

Be the first to rate and review this product.

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer