Audio-Technica ATW-CHG3N 3000 Series Charger (4th Generation)

Charge two 3000 Series handheld or body pack transmitters with the Audio-Technica ATW-CHG3N charger. Link up to five charging stations with one power supply.

The ATW-CHG3N is a networked two-bay charging station for use with 3000 Series (fourth generation) handheld (ATW-T3202) and body-pack (ATW-T3201) transmitters. The station charges NiMH batteries (not included) while they are housed within a transmitter. It will automatically shut off if alkaline or damaged batteries are detected. Once fully charged, a maintenance charging function ensures that batteries retain their full power for as long as the transmitter remains in the charging station.

The ATW-CHG3N is equipped with power and charging status indicator LEDs for easy monitoring. Using the AT8687 link kit and AD-SA1230XA AC adapter (sold separately*), the ATW-CHG3N can be linked with up to four ATW-CHG3 stations and be powered by a single power supply. The ATW-CHG3N also connects to networks via standard Ethernet cable, allowing the charging status of all transmitters in linked stations (both ATW-CHG3N and ATW-CHG3) to be monitored through the dedicated Audio-Technica app or third-party software.
* The AD-SA1230XA is also available bundled with an ATW-CHG3N networked charging statio : ATW-CHG3NAD.

Features:

- Two-bay charging station for use with 3000 Series (fourth generation) handheld (ATW-T3202) and body-pack (ATW-T3201) transmitters
- Charges NiMH batteries (not included) while they are housed within a transmitter
- Automatically shuts off if alkaline or damaged batteries are detected
- Indicator LEDs for easy monitoring of power and charging status
- Up to five read more ATW-CHG3N/ATW-CHG3 charging stations can be linked and powered by a single power supply (using AT8687 link kit and AD-SA1230XA AC adapter, sold separately)
- ATW-CHG3N connects to a network (via standard Ethernet cable), allowing the charging status of all transmitters in linked stations (both ATW-CHG3N and ATW-CHG3) to be monitored through the dedicated Audio-Technica app or third-party software
- Transmitters power off automatically when placed in the charging station and power on automatically when removed
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.
read less

Power Requirements: 12V DC 3.0 A
Charging Output: 3.6V DC 500 mA (x2)
Power Consumption: 5.3 W (when 2 transmitters are charging), 27.8 W (when CHG3N and four CHG3 units are connected and 10 transmitters are charging)
Charging Time: Approx. 6.5 hours (1,900 mAh rechargeable battery)/ Depending on battery type and use pattern.
Operating Temperature Range: 0 degrees C to 40 degrees C (32 degrees F to 104 degrees F)
Dimensions: 185 mm (7.28") x 99 mm (3.90") x 68.5 mm (2.70") (W x D x H)
Net Weight: 410 g (14.5 oz)
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 1.14 lbs
Shipping Dimensions: 8 x 5 x 3 in
Manufacturer Part Number (MPN): ATW-CHG3N

Consumer Alert

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

NOTE: None of the wireless systems we carry are capable of violating the FCC guidelines stated above. We are presenting this information as a matter of legally required disclosure.

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

New

$299.00
  • 8 x  
    $37.38
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to