Audio-Technica AT-VM95ML Dual Moving Magnet Cartridge

With a microlinear stylus for low wear and long life, the Audio-Technical AT-VM95ML turntable cartridge mounts easily to the headshell with just two screws.

Overview

This Audio-Technica AT-VM95ML Dual Moving Magnet Cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

The AT-VM95ML/H combo kit includes the AT-VM95ML dual moving magnet cartridge premounted on the AT-HS6BK headshell.

Features

- VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus
- Aluminum cantilever
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts required
- Compatible with any AT-VMN95 replacement stylus

WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

Specs

- Frequency Response: 20-25,000 Hz
- Channel Separation: 23 (dB at 1 kHz)
- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
- Stylus Construction: Nude square shank
- Recommended Load Impedance: 47,000 ohms
- Output: 3.5 mV (1 kHz, 5 cm/sec.)
- Channel Balance: 1.5 dB (1 kHz)
- Stylus Shape: 2.2 x 0.12 mil Microlinear
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Replacement Stylus: AT-VMN95ML
- Coil Impedance: 3.3 k ohms (1 kHz)
- DC Resistance: 485 ohms
- Load Capacitance: 100 to 200 pF
- Coil Inductance: 550 mH (1 kHz)
- Vertical Tracking Angle: 23°
- Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
- Weight: 6.1 g (0.22 oz)
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver

Dimensions and Weight in Packaging
Base Item: Shipping Weight: 0.09 lbs; Shipping Dimensions: 4 x 3 x 1 in; Manufacturer Part Number (MPN): AT-VM95ML
and Headshell Kit: Shipping Weight: 0.16 lbs; Shipping Dimensions: 4 x 3 x 2 in; Manufacturer Part Number (MPN): AT-VM95ML/H

Documents and Manuals

For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com

Reviews

(1 ratings)

Submitted July 1, 2024 by Scott M in Tallmadge, OH

"Budget Cartridge? Maybe not"

Overall:

(see rating details)

Verified Customer zZounds has verified that this reviewer made a purchase from us.

I mounted this cartridge on a Denon DP-51F, running through a Denon PMA-970 with Cerwin Vega R-123 speakers.When I played through about 5 hours the sound was getting very good, weak mids but I did expect that. after 15 hours this thing just sings, on par with other cartridges I've spent 2-3X as much onIt's bright for sure but the mids really shine on this cartridge, nu mud, no sludge with clear defined bass notesSwitched stylus to the elliptical, about $80-$100 cheaper, picks up a lot more noise and ticks on even gently used LP's, I guess it would be fine for casual listening while doing other things but I put the ML Stylus back on for good.If you are in the market for a MM cartridge in the $200-$400 range, this is money very well spent. I highly recommend this cartridge