Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge
![Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, USED, Blemished, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/at_vm95en_1_sq_789994-98c61c761cd1840985408177930a58ea.jpg)
![Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, USED, Blemished, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/at_vm95en_2_sq_789994-05b447f40c05e9c925ee305f163252ca.jpg)
![Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, USED, Blemished, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/at_vm95en_3_sq_789994-50a902e6db7321a34d80ec28f1538889.jpg)
![Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge, USED, Blemished, Action Position Back](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/at_vm95en_4_sq_789994-76a05dea2587f6cdf6e4cf5afadaad45.jpg)
With an 0.3 x 0.7 mil elliptical nude stylus to fit half-inch mount turntables, Audio-Technica's AT-VM95EN dual moving magnet cartridge is built to perform.
Overview
This Audio-Technica AT-VM95EN Dual Moving Magnet Cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws -- no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
The AT-VM95EN/Headshell combo kit includes the AT-VM95EN dual moving magnet cartridge pre-mounted on the AT-HS6BK headshell.
- Aluminum cantilever
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws -- no nuts required
- Compatible with any AT-VMN95 replacement stylus
The AT-VM95EN/Headshell combo kit includes the AT-VM95EN dual moving magnet cartridge pre-mounted on the AT-HS6BK headshell.
Features
- VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus- Aluminum cantilever
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws -- no nuts required
- Compatible with any AT-VMN95 replacement stylus
Specs
- Frequency Response: 20-23,000 Hz
- Channel Separation: 22 (dB at 1 kHz)
- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
- Stylus Construction: Nude round shank
- Recommended Load Impedance: 47,000 ohms
- Output: 3.5 mV (1 kHz, 5 cm/sec.)
- Channel Balance: 2.0 dB (1 kHz)
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Replacement Stylus: AT-VMN95EN
- Coil Impedance: 3.3 k ohms (1 kHz)
- DC Resistance: 485 ohms
- Load Capacitance: 100 to 200 pF
- Coil Inductance: 550 mH (1 kHz)
- Vertical Tracking Angle: 23*
- Dimensions: 17.2 mm (0.68") H x 18.9 mm (0.74") W x 28.3 mm (1.20") D
- Weight: 6.1 g (0.22 oz)
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
- Channel Separation: 22 (dB at 1 kHz)
- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
- Stylus Construction: Nude round shank
- Recommended Load Impedance: 47,000 ohms
- Output: 3.5 mV (1 kHz, 5 cm/sec.)
- Channel Balance: 2.0 dB (1 kHz)
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Replacement Stylus: AT-VMN95EN
- Coil Impedance: 3.3 k ohms (1 kHz)
- DC Resistance: 485 ohms
- Load Capacitance: 100 to 200 pF
- Coil Inductance: 550 mH (1 kHz)
- Vertical Tracking Angle: 23*
- Dimensions: 17.2 mm (0.68") H x 18.9 mm (0.74") W x 28.3 mm (1.20") D
- Weight: 6.1 g (0.22 oz)
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 0.08 lbs
- Shipping Dimensions: 4 x 3 x 1 in
- Manufacturer Part Number (MPN): AT-VM95EN
- Blemished, USED
- Shipping Weight: 0.08 lbs
- Shipping Dimensions: 4 x 3 x 1 in
- and Headshell Kit
- Shipping Weight: 0.25 lbs
- Shipping Dimensions: 5 x 3 x 2 in
- Manufacturer Part Number (MPN): AT-VM95EN/H
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
Phone: 330-686-2600 x5000
Email: audio-solutions@atus.com
USED, Blemished
What is USED, Blemished?
$99.95
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
Cases and Bags
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.