Audio Technica AT3525 30-Series Cardioid Condenser Microphone
No longer available at zZounds
zZounds Gear Experts Say...
Outstanding performance and versatility. Includes multi-position shock mount. 48-volt phantom power.
Overview
This cardioid condenser microphone has the feel of a studio condenser. It comes complete with a shock mount for 5/8 in.-27 threaded stands and a soft protective pouch.
Features
Outstanding performance and versatility
Flat, extended frequency response
High SPL handling capability
Switchable 80 Hz hi-pass filter and 10 dB pad
Includes multi-position shock mount
Features
Outstanding performance and versatility
Flat, extended frequency response
High SPL handling capability
Switchable 80 Hz hi-pass filter and 10 dB pad
Includes multi-position shock mount
Specs
Element: Condenser
Dynamic Range (Typical): 124 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 48V (±4V), 4 mA typical
Frequency Response: 30 - 20,000 Hz
Switch: 10 dB pad; roll-off
Open Circuit Sensitivity: -48 dB (3.9 mV) re 1V at 1 Pa
Low-frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 100 ohms
Weight: 8.1 oz. (231 g)
Maximum Input Sound Level: 146 dB SPL, 1 kHz at 1% THD
Output Connector: XLRM-type
Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
Accessories furnished: Shock mount; protective pouch
Dynamic Range (Typical): 124 dB, 1 kHz at Max. SPL
Polar Pattern: Cardioid
Phantom Power Requirements: 48V (±4V), 4 mA typical
Frequency Response: 30 - 20,000 Hz
Switch: 10 dB pad; roll-off
Open Circuit Sensitivity: -48 dB (3.9 mV) re 1V at 1 Pa
Low-frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 100 ohms
Weight: 8.1 oz. (231 g)
Maximum Input Sound Level: 146 dB SPL, 1 kHz at 1% THD
Output Connector: XLRM-type
Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
Accessories furnished: Shock mount; protective pouch
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer