Alto Professional TS408 Powered Loudspeaker
zZounds Gear Experts Say...
Rock any room with the TS408, an 8-inch powered speaker with app-based remote control, customizable EQ, Bluetooth streaming, and wireless stereo linking.
Overview
Whether you need a powerful vocal PA or club-shaking bass performance for a DJ set, TS4 speakers deliver loud, clear, room-filling sound for any application. With an eight-inch woofer, and a 1.4-inch compression driver, TS408 delivers 2000W of class-leading power and clarity in equal measure.
Available free for both Android and iOS, the Alto App gives hands-on remote control over Bluetooth levels, Speaker Use Modes, Custom EQ and Sub Size selection. Further, True Wireless Stereo linking can be configured remotely via the app to save time during setup.
Every TS4 features an integrated 3-channel mixer, with two Mic/Line input channels and a dedicated Bluetooth channel. The Mic/Line channels feature XLR/TRS combo jacks and can be used with microphones, instruments, and line-level signals without the need for additional hardware or adjustment. Just plug straight into the rear panel and you're up and running.
The ideal high-powered streaming solution, TS4's built-in Bluetooth connectivity makes it easy to pair your laptop, phone or tablet and get the music pumping in no time at all. With the True Wireless Stereo function you can stream Bluetooth audio to two TS4 speakers in perfect stereo without the need for any cables.
TS4's three preset "Speaker Use" modes let you optimize the speaker for any application, so you'll get great sound every time at the touch of a button. For even more control over your sound, you can configure a Custom EQ within the Alto App and remote adjust the… read more settings from any listening point in the venue. You can even save your favorite Custom EQ setting direct to the TS4 for easy recall whenever you need it.
From the high-quality drivers to the fanless class D amplifiers, every aspect of the TS4 Series has been designed for superb reliability, whether used for mobile gigs and performances or fixed installation. Each speaker features a lightweight, sleek, black box design that can be used as the application demands - freestanding, as a wedge monitor, pole-mounted or suspended via the integrated suspension points.
- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth audio streaming direct from device
- On-board DSP with 4 Speaker Use modes(inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth
- Integrated 3-channel mixer with dual XLR -inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 8" driver, 2.0" (50 mm) high-temperature voice coil
- 1" exit ceramic driver with 1.4" (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design - pole-mountable, wedge monitor or flown application with integral M6 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
read less
Available free for both Android and iOS, the Alto App gives hands-on remote control over Bluetooth levels, Speaker Use Modes, Custom EQ and Sub Size selection. Further, True Wireless Stereo linking can be configured remotely via the app to save time during setup.
Every TS4 features an integrated 3-channel mixer, with two Mic/Line input channels and a dedicated Bluetooth channel. The Mic/Line channels feature XLR/TRS combo jacks and can be used with microphones, instruments, and line-level signals without the need for additional hardware or adjustment. Just plug straight into the rear panel and you're up and running.
The ideal high-powered streaming solution, TS4's built-in Bluetooth connectivity makes it easy to pair your laptop, phone or tablet and get the music pumping in no time at all. With the True Wireless Stereo function you can stream Bluetooth audio to two TS4 speakers in perfect stereo without the need for any cables.
TS4's three preset "Speaker Use" modes let you optimize the speaker for any application, so you'll get great sound every time at the touch of a button. For even more control over your sound, you can configure a Custom EQ within the Alto App and remote adjust the… read more settings from any listening point in the venue. You can even save your favorite Custom EQ setting direct to the TS4 for easy recall whenever you need it.
From the high-quality drivers to the fanless class D amplifiers, every aspect of the TS4 Series has been designed for superb reliability, whether used for mobile gigs and performances or fixed installation. Each speaker features a lightweight, sleek, black box design that can be used as the application demands - freestanding, as a wedge monitor, pole-mounted or suspended via the integrated suspension points.
Features:
- 2000W for powerful performance- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth audio streaming direct from device
- On-board DSP with 4 Speaker Use modes(inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth
- Integrated 3-channel mixer with dual XLR -inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 8" driver, 2.0" (50 mm) high-temperature voice coil
- 1" exit ceramic driver with 1.4" (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design - pole-mountable, wedge monitor or flown application with integral M6 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
Specs
- Output Power: 2000 watts
- Low-Frequency Driver: 8.0" driver, 2.0" (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 O.
- High Frequency Driver: 1.0" exit ceramic driver with 1.4" (35 mm) coil. 1 x 350W @ 4 O.
- Crossover Frequency: 2 kHz
- Maximum SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
- Frequency Response: 62 Hz 20 kHz (+/-3 dB)
- Frequency Range: 52 Hz 20 kHz (-10 dB)
- Horn Coverage: 90 horizontal x 60 vertical (nominal)
- Connectors:
- (2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced)
- (1) XLR output (Link)
- (1) IEC power cable input
- Input Impedance:
-- Line: 10 KO balanced, 20 KO unbalanced
-- Mic: 1.2K
- Line Gain/Volume Control Range: -8 to 0 dB, +4 dBu nominal, +10 dBu for max output
- Mic/Inst. Gain / Volume Control Range: -8 to +50 dB
- USB Charging Port: 5V 2.1A
- Controls:
Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators:
- (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped)
- (1) Link LED (Orange)
- (4) DSP Presets LED (Green)
- (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 900W
- Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application, suspended with integral M6 points, or in a wedge monitor position
- Operating Temperature: 10C to 45C (14F to 113F)
- Dimensions (height x width x depth): 17.2" x .10.1" x 9.6 / 436 x 256 x 245 mm
- Weight: 20.7 lbs. / 9.4 kg
- Low-Frequency Driver: 8.0" driver, 2.0" (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 O.
- High Frequency Driver: 1.0" exit ceramic driver with 1.4" (35 mm) coil. 1 x 350W @ 4 O.
- Crossover Frequency: 2 kHz
- Maximum SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
- Frequency Response: 62 Hz 20 kHz (+/-3 dB)
- Frequency Range: 52 Hz 20 kHz (-10 dB)
- Horn Coverage: 90 horizontal x 60 vertical (nominal)
- Connectors:
- (2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced)
- (1) XLR output (Link)
- (1) IEC power cable input
- Input Impedance:
-- Line: 10 KO balanced, 20 KO unbalanced
-- Mic: 1.2K
- Line Gain/Volume Control Range: -8 to 0 dB, +4 dBu nominal, +10 dBu for max output
- Mic/Inst. Gain / Volume Control Range: -8 to +50 dB
- USB Charging Port: 5V 2.1A
- Controls:
Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators:
- (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped)
- (1) Link LED (Orange)
- (4) DSP Presets LED (Green)
- (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 900W
- Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application, suspended with integral M6 points, or in a wedge monitor position
- Operating Temperature: 10C to 45C (14F to 113F)
- Dimensions (height x width x depth): 17.2" x .10.1" x 9.6 / 436 x 256 x 245 mm
- Weight: 20.7 lbs. / 9.4 kg
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 26.25 lbs
- Shipping Dimensions: 21 x 15 x 14 in
- Manufacturer Part Number (MPN): TS408XUS
- Pair
- Shipping Weight: 52.5 lbs
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 401-659-8135
Web: https://support.altoprofessional.com
Phone: 401-659-8135
Web: https://support.altoprofessional.com
Reviews
Reviewers gave this product an overall rating of 4 out of 5 stars.
(3 ratings)
Submitted July 16, 2024 by Al M in Spring Hill, FL
"TS wow!"
Verified Customer
zZounds has verified that this reviewer made a purchase from us.
Wanted to create a small but powerful system for small to medium size weddings. Bought 2 EV ELX200 12SPs from zZounds. For the tops I half way reluctantly chose the Alto TS408. They did not disappoint! The sound quality, and clear volume totally complimented the 12 inch subs. These small speakers are quite impressive considering how cheap they are in price. They are not QSC K8s but they are a solid choice for any DJ or band. Most will use them as monitors but they are working well for me as Top speakers on My compact setups. I would feel fine doing a 150 person wedding with this set-up.
Musical Background:
DJ since the 80s
Musical Style:
Love it all
4 of 4 people (100%) people found this review helpful. Did you?
Thanks for your opinion!
Pair
$498.00
- 8 x$62.25
FREE -Day Shipping!
Get it
for
Get it
(or get it
with an order of
),
if you order within
Shipping to
This is a carousel with product cards. Use the previous and next buttons to navigate.
People who bought this item also bought
This is a carousel with product cards. Use the previous and next buttons to navigate.