AKG D770 Cardioid Dynamic Handheld Microphone
No longer available at zZounds

zZounds Gear Experts Say...
High output. Rugged construction. Highly efficient windscreen.
Overview
Dynamic microphone for miking instruments and backing vocals in tough night-after-night onstage use. The D 770 features a cardioid polar pattern that is virtually the same for all frequencies ("frequency independent") and uses a patented AKG Varimotion diaphragm.
The D 770 is fitted with a shock absorbing steel wire-mesh inner grill and a wire-mesh outer grill for transducer protection against damage. The outer grill and a layer of special fabric beneath it form a very effective windscreen that will suppress pop and breath noise as well as sibilance. The extended frequency response of the D 770 slightly emphasizes the mid and treble ranges to ensure good intelligibility.
Features:
High-output neodymium transducer
Rugged construction
Highly efficient windscreen
Frequency response optimized for intelligibility
The D 770 is fitted with a shock absorbing steel wire-mesh inner grill and a wire-mesh outer grill for transducer protection against damage. The outer grill and a layer of special fabric beneath it form a very effective windscreen that will suppress pop and breath noise as well as sibilance. The extended frequency response of the D 770 slightly emphasizes the mid and treble ranges to ensure good intelligibility.
Features:
High-output neodymium transducer
Rugged construction
Highly efficient windscreen
Frequency response optimized for intelligibility
Specs
Polar Pattern: Cardioid
Frequency Range: 60 to 20,000 Hz
Sensitivity: 2.5 mV/Pa (-52 dBV re 1 µbar)
Max. SPL: 147 dB SPL (156 dB SPL) for 1% (3%) THD
Equivalent Noise Level: 22 dB (A) to DIN 45412
Impedance: <=600 ohms
Recommended load impedance: >=2000 ohms
Connector: 3-pin male XLR
Finish: Matte black enamel
Dimensions: 50 dia. x 181 mm (2 x 7.1 in.)
Net Weight: 290 g / 10.4 oz.
Shipping Weight: 650 g / 1.4 lbs.
Frequency Range: 60 to 20,000 Hz
Sensitivity: 2.5 mV/Pa (-52 dBV re 1 µbar)
Max. SPL: 147 dB SPL (156 dB SPL) for 1% (3%) THD
Equivalent Noise Level: 22 dB (A) to DIN 45412
Impedance: <=600 ohms
Recommended load impedance: >=2000 ohms
Connector: 3-pin male XLR
Finish: Matte black enamel
Dimensions: 50 dia. x 181 mm (2 x 7.1 in.)
Net Weight: 290 g / 10.4 oz.
Shipping Weight: 650 g / 1.4 lbs.
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.