AKG C2000B Mid-Size Diaphragm Condenser Microphone
No longer available at zZounds














zZounds Gear Experts Say...
Frequency Range: 30 Hz to 20 Khz. Cardioid polar pattern.
Overview
The C2000B is "entry level" for professional-sounding mics. This model is for anyone looking for an affordable, high-quality cardioid recording microphone.
Features
Almost ruler-flat response providing a crystal-clear, "up-front" sound.
Switchable bass rolloff filter for eliminating proximity effect.
-10db Preattenuation pad, so that the microphone can be adjusted to all recording or live miking situations.
Built-in pop screen reducing unwanted noise.
Rugged construction, elegantly styled die-cast metal housing, and silver-gray finish.
Includes H100 shockmount.
Features
Almost ruler-flat response providing a crystal-clear, "up-front" sound.
Switchable bass rolloff filter for eliminating proximity effect.
-10db Preattenuation pad, so that the microphone can be adjusted to all recording or live miking situations.
Built-in pop screen reducing unwanted noise.
Rugged construction, elegantly styled die-cast metal housing, and silver-gray finish.
Includes H100 shockmount.
Specs
Frequency Range: 30 Hz to 20 Khz
Polar Patterns: Cardioid
Preattenuation: -10 dB, Switchable
Basscut Filter: 6 dB/Octave Below 500 Hz
Sensitivity: 20 Mv/Pa (-34Dbv)
Impedance: 200 Ohms
Recommended Load Impedance: 1000 Ohms
Equivalent Noise Level: 20 dB-A
Signal/Noise Ratio (A-Weighted): 4 dB
Maximum SPL for 0.5% THD: 140/150 dB
Power Requirement: 9-52 V Phantom Power
Connector: -Pin Male XLR
Finish: Silver Grey
Current Consumption: approximately 2 Ma
Size: 53ø x159 mm (2.1ø x 6.3 in.)
Net/Shipping Weight: 325/950 g (11.5 oz./2.1 lbs.)
Polar Patterns: Cardioid
Preattenuation: -10 dB, Switchable
Basscut Filter: 6 dB/Octave Below 500 Hz
Sensitivity: 20 Mv/Pa (-34Dbv)
Impedance: 200 Ohms
Recommended Load Impedance: 1000 Ohms
Equivalent Noise Level: 20 dB-A
Signal/Noise Ratio (A-Weighted): 4 dB
Maximum SPL for 0.5% THD: 140/150 dB
Power Requirement: 9-52 V Phantom Power
Connector: -Pin Male XLR
Finish: Silver Grey
Current Consumption: approximately 2 Ma
Size: 53ø x159 mm (2.1ø x 6.3 in.)
Net/Shipping Weight: 325/950 g (11.5 oz./2.1 lbs.)
Reviews
Reviewers gave this product an overall rating of 5 out of 5 stars.
(41 ratings)
Submitted March 11, 2005 by a customer from hotmail.com
"AKGD112 - The Love of My Life"
Until my clients demand a different kick sound than what you would hear on any professional recording, I will be satisfied with this product and its wide range of applications.
Sound
It is the best sounding kick drum mic I have used. It has more application than other names such as the EV868 or the ATM25. People have told me that the acoustical design of my studio is what makes this mic so good, but my room is nothing special! The AKGD112 IS!
Features
Came with an easy manual that explained all applications. Also printed were a few techniques one could use in one's AKGD112 recording. I wish there was a better mount for the microphone.
Quality
It is put together fine, the only thing i do not like is the shark "shark nosed" grill and frame. It makes it a little difficult to get the perfect distance on the kick's skin.
Value
THE PRICE IS AMAZING!
The Wow Factor
I am completely obsessed with the product. I have been using it for quite some time and, believe me, we have our intimate moments.
Musical Background:
Active Musician
Musical Style:
Rock/Alternative/Country/Jazz
2 of 7 people (29%) people found this review helpful. Did you?
Thanks for your opinion!
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.