Acon Digital Equalize 2 Equalizer Plug-in Software

Want a workhorse EQ? Look no further! Acon Digital's Equalize 2 combines an easy user interface with excellent, modern features like zero latency and more.

Acon Digital Equalize 2 is a parametric equalizer plug-in that combines unique features with excellent workflow and an intuitive user interface. Unlike other equalizers, you can freely adjust not only center frequency, gain and bandwidths, but also the filter slope for each band. The filter slope can be set anywhere from 3 dB to ultra-sharp 120 dB per octave.

Needless to say, you can operate Equalize as a zero latency plug-in when using the minimum phase mode or choose to preserve the phase relationships in the linear phase mode. Equalize goes one step further, though, and introduces the unique mixed-phase mode that allows you to set the latency freely in the range of 5 to 120 milliseconds, while preserving the phase relationships as far as possible. That gives a unique control over potential pre-ringing artifacts which is a common problem with linear phase filtering. Latency values below 20 milliseconds ensure that any pre-ringing is masked by the temporal masking of human hearing while preserving time-alignment across the audible frequency range.

Great care has been taken to provide a user interface that is straightforward to use. Band parameters can be adjusted using handles directly in the graphical representation of the frequency response, including bandwidths and filter slopes. A flexible real-time analyzer lets you monitor every aspect of the processing. You can easily switch between full, mid, side, left or right channel processing for each band and Equalize automatically read more routes the audio signal internally to ensure the best results and lowest possible latency.

This version of Equalize includes two newly added filter types: tilt and bandpass. It now offers a total of eight different filter types. Just like the previously available filters, both the tilt and bandpass filters offer unique, continuously adjustable filter slopes in the range of 3 to 120 dB per octave.

The frequency range of the equalizer curve can now be altered conveniently by dragging the edges of the frequency axis or moved by clicking and dragging the center. This makes it possible to zoom in on specific frequency ranges for more precise control. A preferences page offers user settings such as analyzer resolution and user interface language. Another feature is the optional piano keyboard display above the frequency axis. Band frequencies can easily be set to match a tones frequency by clicking the key on the piano keyboard.

Features:

- Eight different band filter types: low cut, low shelf, peak, tilt, bandpass, notch, high shelf and high cut
- Up to twelve independent bands
- Freely adjustable gain, frequency, bandwidth, resonance and filter slope
- Three different phase modes, including the novel mixed phase mode with adjustable latency
- Choose channel mode for each band independently (mid, side, left, right or full processing)
- Two new filter types: tilt and bandpass filters
- Adjustable frequency range in the equalizer curve editor
- Optional piano keyboard display
- EUCON and full Pro Tools HW controller support
- Preferences page with spectrum analyzer, tooltip, language and piano roll settings
- Spectrum analyzer with adjustable frequency tilt
- Band frequency, gain, bandwidth, resonance and filter slope is freely adjustable for each band
- Zero latency in minimum phase mode
- Channel mode (mid, side, left, right or full processing) can be set independently for each band
- Multiple selection of bands
- Resizable graphical user interface
- Solo and bypass modes
- Optional automatic make-up gain
- Optional gain to bandwidth linking
- Two spectrum analyzers that can analyze the input or output signal from the mid, side, left or right channel
- Graphical visualization of the equalizer frequency response
- Preset manager and a large number of factory presets
- Save, load and categorize user presets
read less

Mac Compatibility Info:
- Operating System: mac OS X 10.9 or later
- Runs natively on ARM64 and Intel
- RAM: 1 GB
- Hard drive space: 1 GB
- Additional Requirements: A host application that is compatible with AU, VST, VST3, or AAX (Pro Tools 11 or higher)
- Supported Plug-in Formats: VST-2, VST-3, AU, AAX

Windows Compatibility Info:
- Operating System: Windows 10 / 8 / 7
- Intel Core i3 or AMD multi-core processor
- RAM: 1 GB
- Hard drive space: 1 GB
- Additional Requirements: A host application that is compatible with VST, VST3, or AAX (Pro Tools 10.3.5 or higher)
- Supported Plug-in Formats: VST-2, VST-3, AAX
Base Item
Manufacturer Part Number (MPN): 1035-462

For support or warranty questions, please contact the manufacturer:
Web: https://acondigital.com/support/

Digital Download

$99.00
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to