Pinnacle Microphones Fat Top II Ribbon Microphone - Deluxe Package with Shock Mount and Case

Excellent on vocals, guitar, drums, and more, the Fat Top II deluxe pack includes the Lundahl-upgraded mic plus the deluxe shockmount and aluminum case.

The Fat Top II is a short ribbon passive microphone with a Lundahl upgrade that delivers a smooth, warm, rich, fat, rounded tone. Produces a well-rounded sound without the need to EQ out the brittle or sharp highs. This Deluxe pack includes the Fat Top II with an upgraded shockmount and an aluminum carry case for the ultimate in protection.

This microphone rolls off the high frequencies that will help with perceived warmth. The bi-directional polar pattern picks up sound essentially equally from both faces with a large null between faces, ideal for isolating sound sources. Its frequency and sensitivity response deliver pristine audio results.

Translates natural analog sound into the digital domain, giving warmth and smoothness to what might be a cold and sterile digital recording. Versatile enough to handle any vocals or instruments in recording and live sound application. Can be used in pairs in a Blumlein set up to pick up the entire room. Fat Top II comes standard fitted with the upgraded Lundahl LL2913 transformer. Introducing the upgraded Lundahl to the already quality hardware makes for an extended frequency range. This gives the mic improved definition, lower floor and higher ceiling. Best suited for guitar cabinets, piano, brass and percussion instruments.
WARNING: Cancer and Reproductive Harm - www.p65Warnings.ca.gov.

- Type: Ribbon (velocity) Microphone
- Ribbon Type & Dimensions: 99.99% Pure Aluminum, 2.5 microns, 1 3/4" (L) X 3/16" (W)
- Polar Pattern: Symmetrical Figure 8
- Sensitivity: -54.4 dB (1.5 (mV/Pa)
- Frequency Response: 30 to 15 KHz (+/- 3dB)
- Impedance: <=200 Ohms
- Recommended Load Impedance: 1000 Ohms
- Max.SPL (1% THD @1000 Hz): 135 dB
- Equivalent Noise Level: to IEC 268-4 (A weighted) 17dB
- S/N ratio: re 1Pa: 70 dB
- Connector: 3-Pin Male XLR
- Size: Diameter: 3" (O.D. grill), overall length 8 1/2", 1 7/8" (O.D. body)
- Transformer: Standardly fitted with LL2913 Lundahl Transformer

Handling Instructions:
Ribbon microphones are not designed to withstand excessive air-pressure. The Ribbon is made up of a very thin corrugated aluminum ribbon under light tension. Use for close mic'ing of a kick-drum or vocals can cause damage to the ribbon. Use of a Pop-Filter will reduce the air-pressure and increase life of microphone. When not in use, microphone should be cased to protect from unwanted air-pressure and/or damage. This product is Phantom Power safe.
Dimensions and Weight in Packaging
Black
Shipping Weight: 5.4 lbs
Shipping Dimensions: 12 x 10 x 7 in
Manufacturer Part Number (MPN): D-FTII-DEL-S
Brown
Shipping Weight: 5.4 lbs
Shipping Dimensions: 12 x 10 x 7 in
Manufacturer Part Number (MPN): D-FTII-DEL-G

For support or warranty questions, please contact the manufacturer:
Phone: (360) 623-0912
Email: sales@pinnaclemicrophones.com
Web: https://pinnaclemicrophones.com

Black

Was $599.00
Save $80 thru Aug. 31
$519.00
  • 8 x  
    $64.88
FREE -Day Shipping!
Get it  for
Get it by if you order within
Shipping to
Save $80! Was $599, now only $519
  • For a limited time, save $80 when you buy a Pinnacle Fat Top II with Deluxe Package at zZounds! Hurry -- ends August 31!