Behringer Garage PA Package

No longer available at zZounds
With 1 PMP518M powered mixer, 2 S1020 PA speakers, stands, and cables.

Get off the couch and into the garage! With the help of the wizards at Behringer, we've put together a package ideally suited for band practice - just add mics! This package has just about everything you need to start getting heard, including:

1 x Behringer PMP518M 180W 5 Channel Powered Mixer
2 x Behringer Eurolive S1020 10 in. Speaker Cabinets
2 x Stagg 30 ft. 1/4 in. to 1/4 in. Gauge Speaker Cables
2 x On Stage SS7730 Tripod Speaker Stands

Pick out your favorite mic and cable, and this package is ready to go. For those that are looking for a little more volume from their system, we also offer an upgraded version, with 12 in. S1220 Loudspeakers included instead. Getting your garage practice-ready has never been so easy!

Behringer PMP518M Powered Mixer
The PMP518M mixer delivers 180 Watts of massive power and incredible performance through new-generation amplifier technology, crystal-clear sound plus an ultra-compact and lightweight design. The 24-bit stereo FX processor, IMP mic preamps and more round off this impressive package of power features.

Get massive power and great sound in a lightweight package!

Mixer Features
Super-compact rackmountable 180-Watt powered mixer with 24-bit FX processor

Revolutionary amplifier technology: enormous power, incredible sonic performance and super-light weight

Ultra-compact design at nearly half the depth and weight of conventional powered mixers means no more lugging around dead weight

Ultra-low noise ULN design for highest possible read more headroom and ultra-transparent audio

5-channel mixer section features 5 mic/line channels plus separate 2-track in/output

Integrated 24-bit digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects

Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal

5 high-quality mic preamps with switchable Pad and Clip LEDs

Effective, extremely musical 2-band EQ on all channels

7-band graphic EQ allows precise frequency correction

3 speaker outputs on 1/4 in. jack and professional speaker connectors (compatible with Neutrik Speakon connectors)

Rack mount brackets included

High-quality components and exceptionally rugged construction ensure long life

Behringer S1020 Speakers
The Eurolive S1020 PA speaker is capable of delivering massive power to any audience, from punchy bass to crystal-clear highs.

This Eurolive speaker is designed to meet the needs of gigging bands, mobile DJs and fixed installations. The 240-Watt 2-way PA speaker system includes an extremely powerful 10 in. long-excursion driver for massive acoustic power and dual electro-dynamic drivers for exceptional high-frequency reproduction.

Express yourself and deliver power to the people!

Onstage SS7730 Tripod Speaker Stand
The steel-aluminum design on this affordable speaker stand make it both lightweight and durable. Use either the 1 3/8 in. diameter upper shaft or the included 1 1/2 in. adapter sleeve for a universal fit.

Stand Features
Universal fit with 1 3/8 in. or 1 1/2 in. inserts.

Tension height adjustment knob and safety pin for added safety.

Locking/Retractable leg housing with 120-degree design for low center of gravity and equal weight distribution.

Behringer S1220 Speakers, available with the Upgraded Speakers package, are 280-Watt, 2-way speakers with 12 in. drivers. Turn it up!
read less

Behringer PMP518M Mixer Specs
Microphone Inputs:
Type: XLR, electronically balanced

Mic E.I.N. (20 Hz - 20 kHz):
@ 0 W source resistance -122 dB / -125 dB A-weighted
@ 50 W source resistance -122 dB / -125 dB A-weighted
@ 150 W source resistance -121 dB / -124 dB A-weighted

Frequency response:
< 10 Hz - 100 kHz (-1 dB),
< 10 Hz - 200 kHz (-3 dB)

Gain +33 dB, +8 dB with pad

Max. input level +12 dBu @ 10 dB gain

Impedance: approx. 2.2 kW balanced, 1.1 kW unbalanced

Signal-to-noise ratio: 110 dB / 114 dB A-weighted (-11 dBu in @ +33 dB gain)

Distortion (THD+N): 0.001% / 0.0008% A-weighted

Mono Line Inputs
Type: 1/4 in. TRS connector, balanced

Impedance: approx. 80 kW balanced, 40 kW unbalanced

Max. input level: +30 dBu

EQ
Low 80 Hz / ±15 dB

High 12 kHz / ±15 dB

Loudspeaker Outputs
Type: Neutrik Speakon-compatible, 1/4 in. TS connectors

Load impedance: 4 - 16 W

DSP
Converter: 24-bit Sigma-Delta, Sampling rate 40 kHz

Display
Type: 2-digit, 7-segment LED

Amplifier
Output power: 62 W (8 W), 105 W (4 W) (RMS @ 1 % THD (sine wave))

Output power 100 W (8 W), 180 W (4 W) (Peak Power)

Power Supply
Mains voltages U.S./Canada: 120 V~, 60 Hz

Power consumption: max. 290 W

Fuse: 100 - 120 V~: T 6.3 A H 250 V
220 - 240 V~: T 3.15 A H 250 V

Mains connection: Standard IEC receptacle

Physical/Weight
Dimensions (H x W x D) approx. 4 3/5 x 18 1/2 x 8 7/8 in. / (117 x 470 x 225 mm)

Weight (net): approx. 15.88 lbs (7.2 kg)

Behringer S1020 Speaker Specs
Continuous Power Handling (IEC268-5): 60 Watts

Peak Power Handling: 240 Watts

Type: 2-way full-range speaker

Frequency Response 60 Hz – 20 kHz

Impedance: 8 Ohms

Sound Pressure Level: 98 dB (Full Space, 1 W @ 1 m)

Dispersion: 90° x 40°

Crossover Frequency: 3.5 kHz

Rigging and fittings:
- Ergonomically shaped handles
- Integral tripod and stand adapter

Components
HF Driver: DDual electro-dynamic drivers

Woofer: 10-inch (259 mm)

Dimensions and Weight
Width: 12.2 to 6.7 inches (311 / 170 mm)
Height: 19.3 inches (490 mm)
Depth: 11.1 inches (282 mm)

Weight: 19.8 lbs (9 kg)

Onstage SS7730 Tripod Speaker Stand Specs
Applications: Mid-size speakers

Height Adj.: 44 in.-80 in.

Weight Capacity: 160 lbs.

Upper Shaft Tubing: 1 3/8 in. or 1 1/2 in.

Base Spread: 32 in.-48 in.

Construction: Steel-aluminum

Color: Black Powder Coat Finish

For support or warranty questions, please contact the manufacturer:
Web: https://www.behringer.com/service.html

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer