Trace Elliot TA-100 Acoustic Guitar Amplifier
No longer available at zZounds
![Trace Elliot TA-100 Acoustic Guitar Amplifier, Main](https://cf1.zzounds.com/media/productmedia/fit,2018by3200/quality,85/116942_11420-88ee6ae045aafe21aec3bdfd5c3936ba.jpg)
Take full control of your acoustic tone with the effects, EQ, and other intuitive controls of the TA 100.
Overview
Designed in the U.K. and produced in the U.S.A., the TA-100 features Trace Elliot's signature Shape circuit and built-in auto-compressor on both channels, as well as customizable DSP effects with parameter and setting adjustment with separate reverbs that can be assigned to each channel. This versatile amplifier includes two modes of switchable features for presets and performance variable controls, all of which are also conveniently footswitchable using the supplied six-function foot controller with 25-foot cable. FET circuitry ensures switching is extremely quiet and not audible during a performance.
- 2 x 5" (127mm) specially designed neodymium Celestion
Features:
- 2 preamp channels with 100 Watts stereo total power output.- 2 x 5" (127mm) specially designed neodymium Celestion
Specs
- 2 preamp channels with 100 Watts stereo total power output.
- 2 x 5" (127mm) specially designed neodymium Celestion speakers connected in stereo.
- 1/4" (6.35mm) jack input with Piezo switch, to switch to ultra-high impedance input stage on Channel 1.
- Combination balanced XLR / 1/4" (6.35mm) jack input with phantom power switch on Channel 2.
- Lo-Trim & Hi-Trim rotary controls on Channel 1.
- Gain & Notch filter rotary controls on both Channels.
- Built in auto-compressor on both channels.
- Signal level LED on both channels.
- Shape switch for instant EQ'd sound on both channels (footswitchable on Channel 1).
- Phase switch to help with control of feedback (footswitchable) on both channels.
- Effect Parameter and Setting rotary encoders.
- Allows for separate levels of Reverb to be applied to each channel.
- Channel 1 can also have either Chorus, Flange, Phaser, Tremolo, and various delays including stereo Ping Pong.
- Tap tempo (from either front panel or footswitch).
- 6-band graphic EQ.
- Durable GatorHyde finish
- Feedback Locating System on each band of EQ that uses LEDs to show where feedback is occurring.
- Master volume and Mute switch (footswitchable), mutes all outputs except Tuner Out.
- Tuner output, Left and Right Preamp Outputs and Power amp Inputs (to use as effects loop).
- Two DI outputs can be configured as dry Channel 1 and Channel 2 out, or processed Left and Right channels out.
- Switch for turning front panel lights on or off.
- Power section featuring Dynamic Correction.
- Protective Trace Elliot embroidered carrying bag included.
- Full function footswitch and stage length cable included.
Weight Unpacked: 13.23 lbs. (6 kg)
Weight Packed: 13.23 lbs. (6 kg)
Width Packed: 10.2" (25.908 cm)
Depth Packed: 17" (43.18 cm)
Height Packed: 10.2" (25.908 cm)
- 2 x 5" (127mm) specially designed neodymium Celestion speakers connected in stereo.
- 1/4" (6.35mm) jack input with Piezo switch, to switch to ultra-high impedance input stage on Channel 1.
- Combination balanced XLR / 1/4" (6.35mm) jack input with phantom power switch on Channel 2.
- Lo-Trim & Hi-Trim rotary controls on Channel 1.
- Gain & Notch filter rotary controls on both Channels.
- Built in auto-compressor on both channels.
- Signal level LED on both channels.
- Shape switch for instant EQ'd sound on both channels (footswitchable on Channel 1).
- Phase switch to help with control of feedback (footswitchable) on both channels.
- Effect Parameter and Setting rotary encoders.
- Allows for separate levels of Reverb to be applied to each channel.
- Channel 1 can also have either Chorus, Flange, Phaser, Tremolo, and various delays including stereo Ping Pong.
- Tap tempo (from either front panel or footswitch).
- 6-band graphic EQ.
- Durable GatorHyde finish
- Feedback Locating System on each band of EQ that uses LEDs to show where feedback is occurring.
- Master volume and Mute switch (footswitchable), mutes all outputs except Tuner Out.
- Tuner output, Left and Right Preamp Outputs and Power amp Inputs (to use as effects loop).
- Two DI outputs can be configured as dry Channel 1 and Channel 2 out, or processed Left and Right channels out.
- Switch for turning front panel lights on or off.
- Power section featuring Dynamic Correction.
- Protective Trace Elliot embroidered carrying bag included.
- Full function footswitch and stage length cable included.
Weight Unpacked: 13.23 lbs. (6 kg)
Weight Packed: 13.23 lbs. (6 kg)
Width Packed: 10.2" (25.908 cm)
Depth Packed: 17" (43.18 cm)
Height Packed: 10.2" (25.908 cm)
Documents and Manuals
For support or warranty questions, please contact the manufacturer:
Phone: 877-856-9243
Email: customerservice@traceelliot.com
Web: https://www.traceelliot.com/resources/
Phone: 877-856-9243
Email: customerservice@traceelliot.com
Web: https://www.traceelliot.com/resources/
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.