sE Electronics Gemini 5 Large-Diaphragm Tube and FET Condenser Microphone

No longer available at zZounds
Run your sE Electronics Gemini 5 in FET solid-state mode, or switch to tube mode for a warmer sound. Like a pair of twins, the Gemini is two mics in one.

The Gemini 5 is another first from SE Electronics. Using the same capsule as the industry-standard Gemini II, the G5 is a mic with a difference, just like its big brother.

Unlike the Gemini II, the Gemini 5 has only one tube; however, the tube circuit is bypassable via the brushed aluminium power supply. The G5 is operable as either a high end tube condenser, or a superb solid-state FET mic -- effectively two great mics for the price of one.

The chassis styling is scaled down form the original Gemini II, and the mic comes with a stylish shock mount and flight case.

Tube Mode:

- Frequency Response: 30Hz-20KHz
- Sensitivity: 25.1mV/Pa -30 +/- 1.5dB
- Polar Pattern: Cardioid
- Impedance: <= 200 Ohms
- Equivalent Noise Level: 18dB(A weighted)
- Max SPL for 0.5% THD at 1000Hz: 130dB
- Power Requirement: External Power Supply included
- Connector: 8-pin

Solid-State Mode:

- Frequency Response: 30Hz-20KHz
- Sensitivity: 31.6mV/Pa -30 +/- 1.5dB
- Polar Pattern: Cardioid
- Impedance: <= 200 Ohms
- Equivalent Noise Level: 16dB(A weighted)
- Max SPL for 0.5% THD at 1000Hz: 128dB
- Power Requirement: External Power Supply included
- Connector: 8-pin

For support or warranty questions, please contact the manufacturer:
Phone: 512-847-5696