Rolls MM11 MicMute Momentary Microphone Muting Switch
No longer available at zZounds
Need to mute your XLR microphone for a moment? No on/off switch on your mic? Add this handy mute switch to lower your mic's signal by 60 dB at a touch.
Overview
The Rolls MM11 MicMute is a simple device designed to temporarily mute a balanced XLR signal and will pass phantom power. Simply press the switch for muting, and release to hear the signal again. Used primarily for muting microphones, the MM11 has a large actuator switch which may be used by hand as well as foot.
- Lowers the mic signal about 60 dB
- Sets on a podium or mounts to a Rolls MSC106 Mic Stand Clamp in the event the MM11 is to be used by hand.
- 1 million cycle switch (most switches are rated for 5 - 10 thousand cycles)
- .090 in. steel chassis
- Male and Female XLR jacks
- Momentary Mute Switch
- Rear panel screw holes for convenient mounting
- -passive, requires no power all steel chassis
Features
- Passes Phantom Power- Lowers the mic signal about 60 dB
- Sets on a podium or mounts to a Rolls MSC106 Mic Stand Clamp in the event the MM11 is to be used by hand.
- 1 million cycle switch (most switches are rated for 5 - 10 thousand cycles)
- .090 in. steel chassis
- Male and Female XLR jacks
- Momentary Mute Switch
- Rear panel screw holes for convenient mounting
- -passive, requires no power all steel chassis
Specs
- Dimensions (WxLxH): 2.5 x 3.25 x 1.5 inches
No longer available at zZounds
In most cases, a product is unavailable because it has been discontinued by the manufacturer
This is a carousel with product cards. Use the previous and next buttons to navigate.