Dunlop DC Brick Universal Power Supply

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Dunlop DC Brick Universal Power Supply, Main
Dunlop DC Brick Universal Power Supply, Main
Dunlop DC Brick Universal Power Supply, Main
Dunlop DC Brick Universal Power Supply, Main
Dunlop DC Brick Universal Power Supply, Main Dunlop DC Brick Universal Power Supply, Main Dunlop DC Brick Universal Power Supply, Main Dunlop DC Brick Universal Power Supply, Main
The Dunlop DC Brick is a great way to power your effects pedals. With FCLC guarding against surges and overloads, the Dunlop DC Brick offers protection too.

The Dunlop DCB10 DC Brick is the most reliable and consistent way to power your effects. Forget the collection of wall warts... the DC Brick will drive ten (10) pedals from the same source! More than a power supply, this box is a power conditioner as well. Unlike aging batteries, the Brick supplies a predictable voltage at all times, keeping your effects consistent from show to show.

Performance Under Pressure

Its FCLC (Foldback Current Limiting Circuit) provides ultimate protection against power shorts and overloads. Even at full load, you'll enjoy the quiet and cool operation of a fully regulated power supply. But since battery-powered effects rarely exceed 30 milliamps each, you're not likely to use anywhere near the Brick's capacity of 1000 milliamps output!

Power: Included AC power adapter can utilize a wide range of international wall power from 100 to 240 volts, at 47 to 63 Hz. Supplied with U.S. plug.

Controls: Power Input from AC Adapter (Use only the included adapter!)

Seven 9V outputs can handle an average of 55 milliamps each, or a total of 375 milliamps in any configuration

Three 18V outputs can handle an average of 208 milliamps each, or a total of 625 milliamps in any configuration

All outputs may be used simultaneously for a total power output of up to 1000 milliamp

Cables included for connecting brick to your pedals.

For support or warranty questions, please contact the manufacturer:
Phone: 707-745-2722
Manual

Reviewers gave this product an overall rating of 5 out of 5 stars. (16 ratings)
Submitted December 28, 2006 by a customer from Hotmail.com

"Probably the greatest powering unit invented!"

Overall: 5 out of 5 stars
(see rating details)
If it keeps doing what its doing then I will never have a reason to buy a different power unit. Its small, fits nicely onto my pedal board, powers everything I need it to and doesn't affect my tone. Im very satisfied!
Sound
This product does not affect your tone at all. Absolutely amazing.
Features
Powers 7 9v pedals and 3 18v pedals all at once without losing any sound intensity. Came with all the cables to power the unit and to connect the pedals to the unit.
Ease of Use
Plug and go, simple, a drummer could figure this out
Quality
It literally is a brick, I have no concerns of it shorting out or losing power during a show
Manufacturer Support
Havent had to deal with them yet, dunlop/mxr make great products!
The Wow Factor
Its easily the best product to power multiple effect units. It has a beautiful flat black exterior with white writing, which i believe glows in the dark. And it has a kick ass blue led to show you that the unit is powered.

Musical Background:

Active Musician

Musical Style:

Classic Metal, Rock,
21 of 22 people (95%) people found this review helpful. Did you?
Thanks for your opinion!
Rate and Review this Product
Read more reviews

No longer available at zZounds

In most cases, a product is unavailable because it has been discontinued by the manufacturer