Our recommended alternative
ONLY 2 LEFT

Pinnacle Microphones Fat Top II Ribbon Microphone

A studio secret weapon for guitar cabs, drums, and more! Fat Top II mods the classic "fat head" mic with a Lundahl transformer for extended frequency range.

Pinnacle Microphones Fat Top II Ribbon Microphone

$519.00
  • 8 x  
    $64.88
  • No Credit Check
    6 x  
    $86.50
  • No Credit Check
    4 x  
    $129.75
FREE delivery Saturday

Cascade Microphones Knuckle Head Short Ribbon Mic with Lundahl LL2913 Transformer

No longer available at zZounds
This is a carousel with one large image and a track of thumbnails on the left side. Select any of the thumbnail buttons to change the main image. You may also use the left and right arrow keys to navigate between images.
Cascade Microphones Knuckle Head Short Ribbon Mic with Lundahl LL2913 Transformer, Black and Silver
Cascade Microphones Knuckle Head Short Ribbon Mic with Lundahl LL2913 Transformer, Black and Silver
The Knuckle Head's shape and distressed copper finish evokes early broadcast microphones -- with the smooth, natural ribbon sound Cascade is known for. This version of the mic comes with the Lundahl LL2913 transformer.

The Knuckle Head with Lundahl LL2913 Transformer is a passive ribbon microphone that combines the acoustic components of the successful Fat Head ribbon with a shockmounted headbasket design reminiscent of early broadcast microphones.

The ribbon motor uses Neodymium magnets surrounding a 2.2-micron corrugated aluminum ribbon measuring 5mm x 45mm. The ribbon is mounted symmetrically within the magnetic gap, making the Knuckle Head suitable as the "mid" mic in a MS setup -- the front and back of the mic should produce the same sound.

The ribbon motor and headbasket are suspended within a 6-inch diameter metal hoop by eight springs. The output transformer is located within the cylindrical shaft below the shockmount hoop.

Includes:
- KNUCKLE HEAD ribbon microphone
- Molded Case
- Mic Clip
- Leatherette Pouch

- Type: Ribbon (velocity) Microphone
- Ribbon type & Dimensions: 99% Pure aluminum, 2.2 micron, 1 3/4" (L) X 3/16" (W)
- Polar pattern: Figure 8 Symmetrical design
- Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
- Frequency response: See PDF below
- Output Impedance: <=200 Ohms
- Recommended load impedance: >1000 Ohms
- Max.SPL (1% THD @1000 Hz): 165 dB
- Connector: 3-Pin male XLR
- Size: Diameter: O.D. grill:3", O.D. ring:6", O.D. body:1", Overall length:10"

Be the first to rate and review this product.

No longer available at zZounds